Clean Water Disinfection SOLUTIONS

31. Model 4200-LC Automatic Gas Feeder Controller 12/12/2011

    The JCS Industries Model 4200-LC Automatic Gas Feed Controller feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely.

32. Ceramic Membrane Filtration System 7/17/2015

    The "Ceramic Membrane Filtration System" is a reliable technology to produce clean water by removing the turbidity, bacteria, and cryptosporidium and other protozoa contained in raw water sources such as surface water and ground water. Using a unique ceramic membrane as a filter, this system is a low cost and long life filtration system. Therefore it can enable a water supply system to meet recent demands for safe and tasty water.

33. BatchMaster™ OSHG Batch Process, Electrolytic System 7/28/2010
    PEPCON's BatchMaster™ OSHG is a batch process, electrolytic system. With a simple brine solution (water & salt) and electricity you are able to generate sodium hypochlorite, safely and on-site. The hazards and costs associated with the transportation, storage and handling of chlorine gas or highly concentrated commercial bleach are eliminated.
34. Zinc-B-Gone® 2/4/2020

    Is your facility struggling with zinc in its stormwater discharge even after implementing BMPs?

35. Bardac® LF 18 — A Novel Cooling Water Algaecide 10/23/2020

    The active ingredient in Bardac® LF 18 is dioctyl dimethyl ammonium chloride. This product comes in two concentrations: -10WT (10% w/w) and -50WT (50% w/w). Several chemical properties of this product yield key benefits that set it apart from other industrial cooling water products. It is a quaternary ammonium compound (quat). Quats are typically low cost and highly effective biocides for a broad spectrum of organisms.

36. MagnaPak™ DOC Removal Systems 10/5/2005

    The MagnaPak™ System provides a simple, cost-effective solution for meeting EPA disinfection by-product standards by utilizing the MIEX® ion exchange resin to remove dissolved organic carbon – a precursor to DBP formation – from the raw water supply

37. Filter Inspection And Media Replacement 10/15/2018

    Annual filter inspections are a key component to long term, trouble free filter operation. Loprest’s trained service engineers can inspect your treatment system and provide written recommendations for maintenance, improvements and upgrades to keep your filter system operating at its peak performance.

38. SYNCRO-CLEANSE® 10/15/2018

    Further reduction of the volume of backwash water requirements can be achieved with the application of the Loprest SYNCRO-CLEANSE® process. This patented design utilizes both air and water for a more efficient backwash operation.

39. Performance Test Services For UV Advanced Oxidation Systems 12/1/2025

    UV AOP performance verification requires a robust test matrix covering design, operating, and control conditions. This process includes on-site execution, sample analysis, and troubleshooting to achieve successful regulatory approval.

40. ClorTec® DN On-Site Sodium Hypochlorite Generators 10/6/2015

    The latest generation of brine electrochlorination technology, the ClorTec DN range, offers simple operation and maintenance as well as unrivalled safety advantages.