Clean Water Disinfection SOLUTIONS

41. Wallace & Tiernan® Analyzers and Controllers 12/16/2014

    Wallace & Tiernan MFC analyzer/controller offers a broad combination of drinking water analysis and disinfection/chemical control in a single unit.The MFC analyzer/controller offers an easy, software selectable range of control modes from flow proportional, residual control only, compound loop and set point trim enabling precise control of a chlorinator or metering pump to maintain the desired level of disinfection and water quality.

42. TOC Reduction 4/16/2014

    NeoTech Aqua Solutions provides the most efficient and cost-effective UV systems for destroying Total Organic Carbons (TOC’s) in water.  Whether your destroying NDMA, 1,4-dioxane, TCE, MTBE, urea, endocrine disruptors or other organics, only NeoTech Aqua provides ultraviolet TOC reduction with a treatment chamber optimized for low pressure mercury lamps.  As a result, NeoTech Aqua’s UV systems achieve a three times greater TOC reduction per kilowatt compared to standard UV systems, reducing our clients’ costs and energy consumption. In addition to efficiently generating ample 185 nm UV for TOC reduction, NeoTech Aqua’s TOC reduction systems also generate significant levels of 254 nm UV which serve as a powerful disinfectant, providing you both TOC-free and organism-free product water.

43. ClorTec® Inspection And Maintenance Program 10/6/2015

    De Nora Water Technologies has developed a comprehensive preventative inspection and maintenance contract program for our ClorTec® on-site sodium hypochlorite generation system.

44. OSEC®L On-Site Hypochlorite Generation System 3/1/2023

    The OSEC® L system is a fully automated and pre-packaged low-capacity On-Site Hypochlorite generating system that creates <1% sodium hypochlorite solution based on disposable bipolar electrode technology.

45. Model 420-T Ton Mounted Vacuum Regulator 5/16/2016

    The JCS Industries Model 420-T Ton Mounted Vacuum Regulator is designed for years of safe and reliable service.

46. Ultraviolet Disinfection ETS-UV™ Systems 2/10/2016

    Ultraviolet (UV) irradiation is used for multifunctional purposes.  UV is most commonly used as an environmentally friendly alternative to chemical disinfection. It’s one of the most effective methods for inactivating harmful pathogens such as Listeria, E.coli, Giardia and chlorine tolerant pathogens like Cryptosporidium.  UV is also used for removal of organic and inorganic contaminants, including chlorine, ozone and Total Organic Carbon (TOC).  UV used in conjunction with an Advanced Oxidation Process (AOP) will remove Compounds of Emerging Concerns (CEC's), Synthetic Organics (SO's), Endocrine Disruptor Compounds (EDC's) and Personal and Pharmaceutical Care Products (PPCP's), as well as various taste and odor compounds from water.

47. NeoTech D228™ 4/16/2014

    The NeoTech D228™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.

48. GDT Mixing & Contacting Systems 5/19/2017

    The GDT Process starts with the creation of ozone from an Ozone Generator. The ozone is then drawn into a Mazzei®Venturi Injector which provides dynamic mixing (a Back Pressure Control Valve adjusts injector outlet pressure optimizing ozone mass transfer in the system). Then mixing and contacting is enhanced in a Flash Reactor.

49. Bardac® LF 18 — A Novel Cooling Water Algaecide 10/23/2020

    The active ingredient in Bardac® LF 18 is dioctyl dimethyl ammonium chloride. This product comes in two concentrations: -10WT (10% w/w) and -50WT (50% w/w). Several chemical properties of this product yield key benefits that set it apart from other industrial cooling water products. It is a quaternary ammonium compound (quat). Quats are typically low cost and highly effective biocides for a broad spectrum of organisms.

50. Capital Controls® Series 1041A Automatic Switchover 10/22/2015

    The Automatic Switchover system Series 1041 provides safe, reliable switching between two gas (pressure or vacuum) or two liquid (pressure or level) sources assuring an uninterrupted supply of chemical to the application. Automation of all functions (switchover, system initialization, configuration, lamp test, and safety functions) is done with an internal programmable logic controller for operational flexibility, enhanced reliability, and ease of use. If needed, local manual override is conveniently available for operator control to maintain continuous operation.