Clean Water Disinfection SOLUTIONS

  1. ClorTec® Aftermarket Solutions And Services 10/6/2015

    De Nora Water Technologies can help you to optimise your electrochlorination system operation to deliver consistent life long performance.

  2. ATOMUS F11 Arsenic Removal Cartridges 2/4/2022

    The NSF 61 certified ATOMUS F11 Arsenic removal cartridges from Applied Cartridge Systems are ideal for addressing applications with complex water profiles.

  3. GDT Mixing & Contacting Systems 5/19/2017

    The GDT Process starts with the creation of ozone from an Ozone Generator. The ozone is then drawn into a Mazzei®Venturi Injector which provides dynamic mixing (a Back Pressure Control Valve adjusts injector outlet pressure optimizing ozone mass transfer in the system). Then mixing and contacting is enhanced in a Flash Reactor.

  4. Model 4200-EC Gas Vacuum Feeder Controller 7/15/2016

    The JCS Industries Model 4200EC Gas Vacuum Chemical Feeder mixes and feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely. The system is comprised of a vacuum injector to safely introduce the gas into the feed-water stream, a reversing servo motor coupled with a V-notch valve to regulate the chemical flow rate, and a control module for complete electronic control and communications.

  5. Ultraviolet Disinfection ETS-UV™ Systems 2/10/2016

    Ultraviolet (UV) irradiation is used for multifunctional purposes.  UV is most commonly used as an environmentally friendly alternative to chemical disinfection. It’s one of the most effective methods for inactivating harmful pathogens such as Listeria, E.coli, Giardia and chlorine tolerant pathogens like Cryptosporidium.  UV is also used for removal of organic and inorganic contaminants, including chlorine, ozone and Total Organic Carbon (TOC).  UV used in conjunction with an Advanced Oxidation Process (AOP) will remove Compounds of Emerging Concerns (CEC's), Synthetic Organics (SO's), Endocrine Disruptor Compounds (EDC's) and Personal and Pharmaceutical Care Products (PPCP's), as well as various taste and odor compounds from water.

  6. SIR-110-HP (PFAS Removal) 3/12/2026

    ResinTech SIR-110-HP is a WQA Gold Seal certified gel resin engineered for longchain PFAS removal, purposebuilt for residential drinking water applications.

  7. TrojanUVFlex – Drinking Water Disinfection System 7/25/2017

    The TrojanUVFlex is designed with features to make installation and operation simpler, faster, and more cost-effective than ever before. Built on the proven TrojanUV Solo Lamp Technology platform, TrojanUVFlex allows for energy-efficient high-intensity delivery of UV light in an extremely compact footprint.

  8. Rental, Emergency, Bridge And Supplemental Solutions 1/10/2024

    For just about any water problem, Newterra has you covered. If you’re looking for medium or short-term water or wastewater treatment solutions, Newterra has a large, in-stock inventory of solutions that are available to rent. From supplemental aeration to reverse osmosis systems to pressure vessels and complete wastewater treatment systems, our temporary ownership and rental solutions can save precious capital while solving a critical need. Newterra offers flexible terms and conditions to suit any customer.

  9. Bardac® LF 18 — A Novel Cooling Water Algaecide 10/23/2020

    The active ingredient in Bardac® LF 18 is dioctyl dimethyl ammonium chloride. This product comes in two concentrations: -10WT (10% w/w) and -50WT (50% w/w). Several chemical properties of this product yield key benefits that set it apart from other industrial cooling water products. It is a quaternary ammonium compound (quat). Quats are typically low cost and highly effective biocides for a broad spectrum of organisms.

  10. Capital Controls® Series 1041A Automatic Switchover 10/22/2015

    The Automatic Switchover system Series 1041 provides safe, reliable switching between two gas (pressure or vacuum) or two liquid (pressure or level) sources assuring an uninterrupted supply of chemical to the application. Automation of all functions (switchover, system initialization, configuration, lamp test, and safety functions) is done with an internal programmable logic controller for operational flexibility, enhanced reliability, and ease of use. If needed, local manual override is conveniently available for operator control to maintain continuous operation.