Clean Water Disinfection SOLUTIONS

  1. Water Champ® FX Induction Systems Provide Superior Mixing 8/6/2014

    The Water Champ® FX Chemical Induction System from Evoqua has set the benchmark in chemical feed and disinfection with its innovative design and versatile applications for chlorination, dechlorination, chloramines, pH adjustment and rapid mix. The system provides superior mixing intensity maximizing chemical reaction while using less energy. Independent third party testing has proven that a Water Champ system can provide up to 40% better power to flow-rate ratios compared to other induction mixers or conventional methods.

  2. Ion Exchange 7/29/2016

    Ion exchange, often abbreviated IX, is an effective technology for removing dissolved ionic compounds
    from liquid solutions, primarily drinking water sources. IX is most commonly known for removing nitrate but is also
    effective at removing contaminants such as perchlorate, arsenic, Chrome-6, and more recently, PFAS (Per- and
    Polyfluorinated Substances).

  3. ETS-UV™ For Drinking Water 2/4/2014

    Drinking water facilities are under pressure to do more with less. Public safety and water quality cannot be compromised so it's important to incorporate solutions that are proven to perform. A number of ETS-UV™ disinfection systems have been validated by an independent third party for drinking water in accordance with the US EPA Design Guidance Manual and NSF/ANSI Standard 61.

  4. WEDECO LBX e Series UV System 10/18/2013

    WEDECO LBX e UV system is a compact closed vessel UV reactor for drinking water, wastewater, water reuse, and WEDEO’s MiPRO Advanced Oxidation Processes (AOP) applications. Equipped with WEDECO’s low-pressure, high output amalgam ECORAY® UV lamps and OptiDose sensor based control, the LBXe provides the highest operating efficiency with low life-cycle costs. Additionally, the LBXe reactor’s extensive validation envelope ensures disinfection performance over a range of UV transmittance (UVT) values, flowrates, and a variety of target organisms.

  5. Field Pilot Studies 10/15/2018

    Pilot tests conducted at numerous facilities demonstrate that Loprest treatment processes successfully reduce iron, manganese, arsenic, nitrate, and many other select contaminants in drinking water to well below the Maximum Contaminant Level (MCL). Loprest can provide self-contained portable, free-standing pilot units or mobile, trailer-mounted units, depending on specific testing needs at each site.

  6. Aquafine Ultraviolet Treatment Systems For TOC Reduction 1/29/2025

    Aquafine TOC reduction units coupled with ion exchange systems or EDI will oxidize trace organics into smaller ionic species, carbon dioxide and water, which are more readily removed by ion exchange resins, EDI, and/or degasifiers.

  7. Capital Controls® Gas Feeder Series WM4000 10/12/2015

    Capital Controls Series WM4000 gas feeders are wall cabinet mounted vacuum operated and designed to conveniently house a combination of gas feed equipment. The fibreglass cabinets enclose the gas flow control components.

  8. Zinc-B-Gone® 2/4/2020

    Is your facility struggling with zinc in its stormwater discharge even after implementing BMPs?

  9. NeoTech D338™ 4/16/2014

    The NeoTech D338™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.

  10. Large Wafer® UV Generator 2/28/2023

    The Wafer® system is the next generation of medium pressure UV systems.