Wastewater Flow Control Measurement Solutions

  1. Capital Controls® Series 71P11A Gas Pressure Reducing Valve 10/15/2015

    The Series 71P11A Gas Pressure Reducing and Shutoff Valve is a diaphragm-type gas pressure regulating valve designed for use on chlorine, sulfur dioxide and ammonia gas service. The valve is used in a gas dispensing system to prevent liquefaction of the gas by providing a controlled pressure drop in the piping system. Downstream pressure is regulated to a reduced value by adjustment of the control setting. If the downstream pressure exceeds the pressure at which the valve is set, gas flow will be shut off.

  2. Capital Controls Series 480 Vacuum Gas Feeders 10/8/2015

    The Capital Controls Series 480 all-vacuum gas feeder is designed for direct mounting to a 150 pound gas cylinder or ton container. It is a basic alternative for those applications requiring a chlorine feed rate of 250 PPD (5 kg/h) or less. 

  3. Capital Controls® Series 200 Vacuum Gas Feeders 10/8/2015

    ADVANCE™ Series 200 gas feeders are designed for or automatic gas regulation. Automatic operation requires a simple addition of a motorized control valve.

  4. Capital Controls® VEGA™ Gas Chlorinator Vent Exhaust Gas Arrestor 10/6/2015

    The Capital Controls® VEGA™ is a disposable chlorinator vacuum regulator vent gas arrestor designed to treat occasional chlorine gas vent releases that may accompany chlorine container changeovers and fouled vacuum regulator inlet valves. The field tested VEGA prevents nuisance tripping of chlorine room air sensor alarms; helps compliance with local, state and federal code restrictions against exhausting chlorine fumes outside of a building; keeps the building free from chlorine related acid corrosion.

  5. Multiphase Flowmeter VIS (Vega Isokinetic Sampling) 8/24/2015

    VIS is a high-performing yet compact multiphase flowmeter, tailored for wet gas applications and able to provide outstanding accuracy also in the most challenging operating regions.

  6. FLUXUS® F401 Portable Flow Meter 12/9/2014

    The FLUXUS® F401 is FLEXIM's dedicated single channel portable flow meter for applications in the municipial water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas outdoor - being ideal for water loss activities prescribed in AWWA M-36.

  7. FLUXUS ADM 5107 Water Flowmeter 12/9/2014

    The FLUXUS ADM 5107 is FLEXIM's solution for many flow metering applications found in the water and wastewater sector and adjacent industries. As FLEXIMs basic and economic alternative, the ADM 5107 offers the same benefits in terms of accuracy and reliability as its bigger brothers, the FLUXUS ADM 7407 and ADM 8027.

  8. FLUXUS F704 Ultrasonic Flowmeter 12/9/2014

    With one or two flow channels and versatile electrical inputs and outputs, the FLUXUS F704 can optimally be configured to your application needs, measuring and handling a variety of process parameters.

  9. FLUXUS F601 Portable Flowmeter 12/9/2014

    The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters.

  10. Fusion Total Organic Carbon (TOC) Analyzer 10/16/2014

    The Fusion Total Organic Carbon (TOC) Analyzer utilizes UV Persulfate oxidation allowing superior carbon liberation from even the most challenging matrixes. Low-end sensitivity is achieved from a Non-Dispersive Infrared (NDIR) detector. The Fusion Total Organic Carbon (TOC) UV Persulfate Analyzer offers more flexibility, intelligence and user friendliness making this analyzer ideally suited for the most demanding laboratory needs.