FLUXUS F704 Ultrasonic Flowmeter

Source: FLEXIM Americas Corp.


With one or two flow channels and versatile electrical inputs and outputs, the FLUXUS F704 can optimally be configured to your application needs, measuring and handling a variety of process parameters.

The FLUXUS F704 features a robust metal field housing. Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus installed quickly, without any process interruption and without any production stop.

Since the flowmeter's transducers are not in contact with the medium to be measured, they are not submitted to wear and tear. Transducers for the common pipe diameters (0,25 to 63 inches feet) and temperatures ranges (from -256°F to 750°F) as well as hazardous zones (ATEX and FM) are available.

The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid.

The flowmeter is the ideal instrument for monitoring chemically aggressive, toxic or just media that you want to keep inside the pipe.

Thanks to its exceptional dual-uP technology, the high number of measuring cycles per second, and the adaptive signal processing, the FLUXUS® ADM 7407 produces stable and reliable measuring results even under difficult conditions.

No zeroing procedure is necessary at the commissioning since all transducer pairs are factory calibrated and the calibration data is permanently stored in the transducers themselves (EPROM).

An extended status display helps the user to judge the measuring situation and the current accuracy directly during the measurement.

The FLUXUS F704 is delivered with one or two flow measurement channels. Additionally, it can be equipped with various outputs and up to 4 process inputs. The input quantities (e.g. temperature or pressure) can be used by the flowmeter together with the measured flow for the calculation of further quantities: e.g. energy, mass flow, etc.