Wastewater Flow Control Measurement Solutions

  1. TIDALFLUX 2300 Electromagnetic Flowmeter 8/26/2019

    The TIDALFLUX 2300 is an electromagnetic flowmeter (EMF) with a patented, capacitive level measurement for use in partially filled pipes (up to DN1600 / 64”). The meter is the ideal solution for flow measurement of municipal or industrial wastewater in pressureless transport lines. However, the EMF is also suitable for measurement of effluent brine from dredging, mining or sea/well water injection applications. Unlike open channel systems (Venturi, V-notches etc.) the inline flowmeter is a closed measuring solution without obstructions and with a much better accuracy at lower total costs of ownership.

  2. Air/Gas Mass Flow Meter Improves Wastewater Treatment Processing Efficiency 12/15/2017

    One of the most common processes in wastewater treatment is the activated sludge method, which biologically treats the wastewater through the use of large aeration basins. This process requires the pumping of compressed air into the aeration basins where a diffuser system ensures the air is distributed evenly for optimum treatment. The energy needed to provide compressed air is a significant cost in the operation of a wastewater treatment plant.

  3. Lab Gas Sub-Metering Accuracy Improves With Thermal Flow Meters To Save Money 12/1/2017

    Facility administrators will find the advanced ST100 Series Thermal Mass Air/Gas Flow Meter from Fluid Components International (FCI) helps them improve the accuracy of specialty gas point of use and sub-metering operations to achieve accurate billing in their labs for better cost tracking and control.

  4. 2 Applications That Triggered The Rise Of Coriolis Flow Measurement 11/1/2017

    Coriolis measurement has been adopted as a default technology in many application scenarios due to its high accuracy and immunity to process variables (temperature, pressure and flow profile). However, Coriolis wasn't always widely accepted. Two applications, in particular, helped what was once a nascent flow measurement technology gain a foothold in the marketplace.

  5. Thermal Flow Meters For Mixed Gas Applications 5/22/2017

    Fox Thermal Flow Meters use a constant temperature differential (constant Δ T) technology to measure mass flow rate of air and gases.

  6. Model FT4A Thermal Mass Flow Meter And Temperature Transmitter 4/17/2017

    Offering you the flexibility to monitor multiple gas types at the push of a button, rotate the housing as needed for tight installations, and configure meter settings from advanced software, the FOX Model FT4A thermal mass flow meter and temperature transmitter can be used in a large variety of Oil & Gas, Industrial, and Wastewater gas flow measurement applications.

  7. ExactSteam V-Cone Flowmeter 3/16/2017

    McCrometer’s ExactSteam V-Cone System is a complete flowmeter for steam metering, factory configured for energy metering or mass flow. The meter accurately measures steam across the entire range with technology-leading low flow cut off.

  8. Ultrasonic Flow Meters Improve Biogas Measurements 9/20/2016

    As interest in biogas grows, more attention is being paid to measuring biogas flow, which has long been a problem area in process measuring technology.

  9. Fox Model FT1 Gas Mass Flow Meter 8/23/2016

    The Fox DDC-Sensor™ is a new state-of-the-art sensor technology used in the Fox Model FT1 Thermal Gas Flow Meter. The DDC-Sensor™, a Direct Digitally Controlled sensor, is unlike other thermal flow sensors available on the market. Instead of using traditional analog circuitry, the DDC-Sensor™ is interfaced directly to the FT1 microprocessor for more speed and programmability. The DDC-Sensor™ accurately responds to changes in process variables (gas flow rate, pressure, and temperature) to determine mass flow rate, totalized flow, and temperature.

     

  10. Turbidity And Total Suspended Solids (TSS) Sensor: Aztec ATS430 6/23/2016

    The ATS430 can be counted on to provide improved control of turbidity and suspended solids throughout its operational life. Its service-free design, plus features including in-situ cleaning, simplified calibration, predictive maintenance diagnostics and EZLink connectivity, enables it to offer the lowest cost of ownership of any device on the market.