Wastewater Flow Control Measurement Solutions

  1. WATERFLUX 3050 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX 3050 is an electromagnetic flowmeter (EMF) for basic water applications. It offers cost-effective flow measurement in applications where extremely high accuracy, extensive diagnostics or a wide range of digital communication options are not a priority. Its measuring tube with a rectangular and reduced cross-section enables a stable measurement even at low flow rates. Due to the optimized flow profile, the meter is practically independent of interferences from the installation environment. It can be installed virtually anywhere without straight inlet or outlet runs – behind pipe bends, slide valves or a reduction in the pipe.

  2. OPTISONIC 7300 Biogas Ultrasonic Flowmeter 8/26/2019

    The OPTISONIC 7300 Biogas is an ultrasonic flowmeter for low pressure biogas, landfill and sewage gas applications. The flowmeter is ideally suited to measure biogas with a high CO2 content as well as small amounts of other media like H2S, nitrogen, hydrocarbons or condensation water. Its corrosion resistant titanium transducers provide a strong ultrasonic signal into the gas. The signal processing of the meter allows a better detection of small, strongly dampened acoustic signals.

  3. OPTIFLUX 2300 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 2300 is an electromagnetic flowmeter (EMF) for all demanding applications with water and wastewater. The high-end meter is particularly suitable for applications requiring high accuracy and extensive diagnostics.

  4. OPTIFLUX 2100 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 2100 is an electromagnetic flowmeter (EMF) for standard water and wastewater applications. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. Installation in measurement chambers subject to (constant) flooding is possible with the remote IP68 / NEMA 6P rated version.

  5. OPTIFLUX 2050 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 2050 is an electromagnetic flowmeter (EMF) for basic water and wastewater applications. It is suitable for all cost-effective measurements where extremely high accuracy, extensive diagnostics or a wide range of communication options are not a priority. The EMF has a wide diameter range (DN25…1200 / 1…48") and all drinking water approvals. The extra isolation of the electronic device and housing makes this EMF particularly suitable for use in areas with extreme humidity.

  6. OPTIFLUX 1300 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 1300 is an electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for applications with conductive liquids (≥ 5 μS/cm) and higher solid content (up to 70%). Unlike the OPTIFLUX 1100, the OPTIFLUX 1300 offers a better accuracy. The flowmeter already meets the demands of many applications in various industries. It has established itself as the preferred solution for OEM machinery applications, dosing systems, compact skids, chemical handling systems or pump and firefighting systems.

  7. OPTIFLUX 1100 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 1100 is a cost-effective electromagnetic flowmeter (EMF) with a lightweight wafer-style design. The meter is an economical solution for general applications with conductive liquids (≥5 μS/cm) and lowers solid content (up to 10%). Unlike the basic device OPTIFLUX 1050, the OPTIFLUX 1100 offers better accuracy. It is suitable for use in various industries – from water, wastewater, and mobile applications to machine building (OEM), agriculture, and utilities to firefighting.

  8. OPTIFLUX 1050 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, extensive diagnostics or a wide range of communication options are not a priority. The extra isolation of the electronic device and housing makes this EMF also suitable for use in areas with extreme humidity.

  9. ENVIROMAG Electromagnetic Flowmeter 8/26/2019

    The ENVIROMAG is an electromagnetic flowmeter. The magmeter is the optimum solution for North American water and wastewater measurement applications. Its design and performance makes it the choice for flow measurement throughout the process.

  10. OPTIFLUX 7300 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 7300 is a an electromagnetic flowmeter (EMF) for measuring very low conductivity liquids (≥0.05 μS/cm). The high-end meter is particularly suitable for applications with extremely adhesive and greasy media that tend to form an insulating film. It is also the first choice for applications involving high vibration and noise as well as oxidizing, abrasive or toxic chemicals. The leak-tight, vacuum and temperature resistant ceramic tube construction also complies with regulations of the food industry (FDA, EC1934/2004). Therefore, hygienic flow measurement with advanced requirements is another field of application.