As the measurement is carried out from the pipe wall outside and without contact with the water column, there is no need to enter the piping system or to interrupt supply. Thus, the FLUXUS® F401 is the ideal tool for service and maintenance activities, for long or short term monitoring, data logging and existing meter verification.
The FLUXUS® F401 is equipped with water-tight IP68 / NEMA 6P transducers, with the flow transmitter residing inside a IP67 / NEMA 6 suitcase. Combining its internal battery capacity with an additional external battery suitcase (IP67 / NEMA 6 protected), the F401 offers long term remote measurements of at least one week.
Due to its matched transducer pairs and sophisticated internal signal processing, the F401 is highly zero point stable and recognizes even the smallest flow rates, thus being also the ideal measurement tool for leak detection.
Pipe sizes from 1 to 120 inches, solid contents of up to 6% by volume as well as old and rusty steel, badly manufactured GRP or even armored concrete pipes (independent or lining and build-up inside the pipe) are not a measurement challenge to the F401.
All this makes the FLUXUS® F401 the superior companion for the daily work of water suppliers, hydrologist and engineering offices.