Wastewater Aeration Products

  1. KLa Systems Floating Effluent Decanters
    6/5/2009

    KLa Systems floating effluent decanters are used to draw clarified liquid from near the liquid surface of sequencing batch reactors and aerobic digesters.

  2. Bi-Directional Jet Aerators
    6/18/2008
    Mass Transfer Systems bi-directional jet aerators are designed with jet aeration nozzles installed on both sides of the liquid/air jet aeration manifold. This configuration is most applicable for square or rectangular tanks, larger lagoons, and sequence batch reactors where directional flow patterns are not desired.
  3. Membrane Aerated Biofilm Reactors (MABR)
    8/8/2017

    This revolutionary aerobic wastewater treatment solution is modular and reduces energy usage by up to 90% compared to conventional treatment.

  4. Kynar PVDF Jet Aerator For Improved Wear Resistance
    5/4/2015

    Ten years ago, KLa Systems was presented with the challenge of finding a more wear-resistant material for our jet aeration nozzles.  The inner nozzle is the liquid propulsion nozzle of the jet aerator and continuously sees high volumes of motive liquid flow at velocities ranging from 33-46 ft/s.  Traditionally, these inner jet nozzles were made from the same FRP material as the outer jet with the industry accepted corrosion/abrasion liner made up of C-Glass/Nexus and Silicon Carbide impregnated into the vinylester resin.  For many years this material had held up in most industrial and municipal bioprocesses with no adverse deterioration or wear.

  5. Aeration- DiF-JET Aerators
    12/26/2012

    Aeration is the heart of most industrial and municipal wastewater treatment and we have a new, cutting-edge solution.

  6. Bio-Denitro Phase Isolation Technology
    1/5/2016

    Proven phased operation in a simpler package.

  7. Airmaster Aerator "TURBO X-TREME" Aeration- 25 Hp - 460V/3Ph - "841" Motor
    6/20/2007
    Each aerator shall be capable of producing 3.0 lbs. of oxygen per nameplate horsepower per hour under normal conditions during aeration. Each 25 HP aerator shall be capable of pumping and mixing approximately 5,040,000 gallons per day under normal conditions and continuous operation
  8. Airmaster Aerator "TURBO X-TREME" Aeration - 20 Hp - 230V/460/3Ph
    6/20/2007
    Each aerator shall be capable of producing 3.0 lbs. of oxygen per nameplate horsepower per hour under normal conditions during aeration. Each 15 HP aerator shall be capable of pumping and mixing approximately 4,032,000 gallons per day under normal conditions and continuous operation
  9. Submersible Aerator Type ABS XTA/XTAK
    8/2/2018

    The XTA and XTAK are self-aspirating submersible aerators for wastewater and water treatment in municipal and industrial plants. The main areas of application are mixing and equalization tanks, activated sludge tanks, SBR, and sludge storage tanks.

  10. AIRE-O2® Combined Technologies (ACT®)
    5/18/2005
    AIRE-O2® Combined Technologies (ACT®) are system technologies based on horizontal and vertical aeration capabilities that produce synergistic results