Wastewater Aeration Products

  1. Traffic Rated Screen Drain Grates
    3/31/2014

    Most lift stations and basins require separate drain inlets that do little to keep out large solids such as gravel, branches and general litter than can destroy pumps. ClearBlu has developed a traffic rated grate system that utilizes perforated plate with 1/4″ holes. The grate sits in a heavy grate frame that embeds in concrete. By embedding the frame in concrete, traffic weight is carried by the frame and concrete and not the basin. This allows the basin to be secured and sealed to a poly or fiberglass basin.

  2. Sanitaire® Silver Series II Diffused Aeration System
    3/18/2014

    For a combination of high aeration efficiency and low operating costs, there’s the Sanitaire Silver Series II membrane diffuser – the most widely used fine bubble diffused aeration system available today.

  3. Cyclix™ Anaerobic Digester Mixing Control System
    4/6/2018

    The Cyclix™ system is a controls package that can be utilized with a JetMix™ hydraulic  mixing system to optimize operational time and reduce energy costs. The system consists of a control panel with a programmable logic controller (PLC) and temperature sensors that monitor temperature within the reactor to dictate when the mixing system should be operated.

  4. TWISTER® Low-Speed Aerator
    2/18/2015

    Long-lasting performance, and the highest oxygen-transfer rates of any mechanical aeration system on the market.

  5. Kynar PVDF Jet Aerator For Improved Wear Resistance
    5/4/2015

    Ten years ago, KLa Systems was presented with the challenge of finding a more wear-resistant material for our jet aeration nozzles.  The inner nozzle is the liquid propulsion nozzle of the jet aerator and continuously sees high volumes of motive liquid flow at velocities ranging from 33-46 ft/s.  Traditionally, these inner jet nozzles were made from the same FRP material as the outer jet with the industry accepted corrosion/abrasion liner made up of C-Glass/Nexus and Silicon Carbide impregnated into the vinylester resin.  For many years this material had held up in most industrial and municipal bioprocesses with no adverse deterioration or wear.

  6. Radial Jet Pod Aerators
    6/18/2008
    The Mass Transfer Systems radial jet pod aerators are designed with jet aeration nozzles installed around the circumference of an integral liquid / air pod body. This configuration is most applicable for smaller round and square tanks and sequence batch reactors where directional flow patterns are not desirable.
  7. Sanitaire® Bioloop® Advanced Oxidation Ditch
    9/6/2012

    Reliable and efficient technologies are necessary for the treatment of municipal wastewater. Of the available technologies, the oxidation ditch process is well known for stable operation and reliable effluent quality.

  8. Airmaster Aerator "TURBO X-TREME" Aeration- 10 Hp - 230V/460/3Ph
    6/20/2007
    Each aerator shall be capable of producing 3.0 lbs. of oxygen per nameplate horsepower per hour under normal conditions during aeration. Each 15 HP aerator shall be capable of pumping and mixing approximately 2,016,000 gallons per day under normal conditions and continuous operation
  9. Bi-Directional Jet Aerators
    6/18/2008
    Mass Transfer Systems bi-directional jet aerators are designed with jet aeration nozzles installed on both sides of the liquid/air jet aeration manifold. This configuration is most applicable for square or rectangular tanks, larger lagoons, and sequence batch reactors where directional flow patterns are not desired.
  10. DAVCO™ Retrofit and Rehab Services for Biological Wastewater Treatment Plants
    11/22/2014

    The Davco™ product line of Evoqua located in Thomasville, GA, offers retrofit, rehab, and replacement parts and services and the installation of water and wastewater filtration, separation, clarification, aeration, biological treatment, and screw pumps. Our retrofit and rehab services save municipal and industrial water and wastewater plants time and budget in addressing worn out, over-extended-in-capacity treatment facilities that are costly to maintain.