Wastewater Aeration Products

  1. Jet Aeration
    12/20/2007
    The Mass Transfer Systems bi-directional jet aerators are designed with jet aeration nozzles installed on both sides of the liquid / air jet aeration manifold. This configuration is most applicable for square or rectanglular tanks, larger lagoons, and sequence batch reactors where directional flow patterns are not desired
  2. The Wet Well Wizard
    11/2/2015

    The Wet Well Wizard is the only ‘one-size-fits-all’ wet well aeration system that has no moving parts, is completely non-corrosive, is simple to install, and utilizes no electricity underwater. It can be installed in 30 minutes and requires almost no maintenance.

  3. KLa Systems Jet Aerator
    10/28/2008

    The high-alpha factor and clean water oxygen transfer performance of KLa’s jet aeration technology results in low energy costs and reduced off-gas volume for industrial and biosolids applications.

  4. RollsAIR Extended Aeration Systems
    8/26/2015

    RollsAIR™ & RollsAIR™ HS-STP®: Offering versatility and consistent high performance for multi-family residential and large commercial properties. The RollsAIR™ and the RollsAIR™ HS-STP® offer a cost effective method to treat larger flows for a multitude of applications.

  5. Kynar PVDF Jet Aerator For Improved Wear Resistance
    5/4/2015

    Ten years ago, KLa Systems was presented with the challenge of finding a more wear-resistant material for our jet aeration nozzles.  The inner nozzle is the liquid propulsion nozzle of the jet aerator and continuously sees high volumes of motive liquid flow at velocities ranging from 33-46 ft/s.  Traditionally, these inner jet nozzles were made from the same FRP material as the outer jet with the industry accepted corrosion/abrasion liner made up of C-Glass/Nexus and Silicon Carbide impregnated into the vinylester resin.  For many years this material had held up in most industrial and municipal bioprocesses with no adverse deterioration or wear.

  6. TORNADO® Subsurface Aerators
    8/8/2017

    With thousands of units in operation around the world, Tornado subsurface aerators have a proven record of maximizing performance while minimizing energy consumption.

  7. Floating Aerator / Mixer
    10/18/2013

    DO2E Aerator / Mixers are high-efficiency all welded, heavy-duty PVC devices that are unique in several ways. DO2E’s patented products are designed to pull water from significant depths for aeration and mixing. By operating with low-pressure (<1.85 P.S.I.) high-volume airflow, these devices maximize energy efficiency. Our patented products are scalable and multi voltage.

  8. MicroShield Technology
    6/25/2014

    Our diffusers can last upwards of 10 years. It isn’t science fiction. It’s simply science, multiplied by our MicroShield Technology to protect against degradation.

  9. OxyStream™ Oxidation Ditch
    1/8/2015

    The OxyStream™ Oxidation Ditch from WesTech Engineering has proven to be the ideal equipment for biological wastewater treatment applications throughout the world. It combines vertically mounted, low-speed surface aerators with an oxidation ditch design to maximize oxygen transfer efficiency while maintaining the greatest flexibility for power turndown. In addition, the OxyStream™ has greater side water depths and fewer required aerators than a conventional brush rotor or disc rotor oxidation ditch. The vertical slow-speed surface aerator eliminates maintenance-prone horizontal shafts, pillow block bearings, and drive units near the water surface. Above all, the OxyStream™ Oxidation Ditch provides energy savings and produces predictable, high-quality effluent.

  10. Aeration Works Division
    6/9/2011
    The Aeration Works Division was created to give operators of aeration systems a source for fast, reliable installations and maintenance. Made up of experienced installers and field service professionals, the Aeration Works Division are experts at the installation and maintenance of EDI aeration systems.