Wastewater Aeration Products

  1. Directional Jet Manifold Aerators
    6/18/2008
    The Mass Transfer Systems directional jet aerators are designed with jet aeration nozzles installed on only side of the liquid / air jet aeration manifold. This configuration is most applicable for round tanks, lagoons, and ditches where directional flow patterns can be achieved to aid in the mixing of the tank contents.
  2. Sigma Air Manager Series
    12/30/2014

    System controls are critical to a wastewater blower system. Without them, a system with multiple blowers operating on their individual controls will run more than necessary and result in wasted energy. Maintenance costs increase and worst of all: process performance suffers.

  3. Kynar PVDF Jet Aerator For Improved Wear Resistance
    5/4/2015

    Ten years ago, KLa Systems was presented with the challenge of finding a more wear-resistant material for our jet aeration nozzles.  The inner nozzle is the liquid propulsion nozzle of the jet aerator and continuously sees high volumes of motive liquid flow at velocities ranging from 33-46 ft/s.  Traditionally, these inner jet nozzles were made from the same FRP material as the outer jet with the industry accepted corrosion/abrasion liner made up of C-Glass/Nexus and Silicon Carbide impregnated into the vinylester resin.  For many years this material had held up in most industrial and municipal bioprocesses with no adverse deterioration or wear.

  4. Effluent Water Treatment
    11/11/2010
    Our Aerating Fountains should not be confused with floating fountains. These surface spray aerators are engineered to provide results, and are supported by a 5-year warranty and Pattern Guarantee.
  5. Aeration: Airmaster Aerator
    6/20/2007
    Each aeration unit shall be capable of producing 3.0 lbs. of oxygen per nameplate horsepower per hour under normal conditions during aeration. Each 15 HP aeration unit is capable of pumping and mixing approximately 3,024,000 gallons per day under normal conditions and continuous operation
  6. Thermatel® TA2 Mass Flow Transmitter
    11/15/2013

    The Thermatel® Model TA2 thermal mass flow transmitter, based on thermal dispersion technology, provides reliable mass measurement for air and gas flow applications.

  7. Airmaster Aerator "TURBO X-TREME" Aeration- 10 Hp - 230V/460/3Ph
    6/20/2007
    Each aerator shall be capable of producing 3.0 lbs. of oxygen per nameplate horsepower per hour under normal conditions during aeration. Each 15 HP aerator shall be capable of pumping and mixing approximately 2,016,000 gallons per day under normal conditions and continuous operation
  8. Aeration; Bioflo
    12/28/2007
    S&N AIROFLO has developed and tested a new attached aeration growth treatment unit that can be used to upgrade lagoons to achieve more efficient nitrification. Most lagoons struggle to consistently meet 30/30 requirements for BOD5 and suspended solids
  9. SewerGard 210 For Ultra-Corrosive, Industrial Wastewater Environments
    9/5/2013

    Sauereisen SewerGard Industrial No. 210 is a novolac epoxy that is specifically formulated for industrial wastewater environments where plants and refineries treat contaminated water before it is sent to a municipal wastewater treatment plant.

  10. PASSAVANT® Disc Diffuser ROEFLEX®
    2/20/2014

    The disc diffuser ROEFLEX® stands out for its simple and robust design. It consists of a unique, convex shaped support disc. The disc is covered by a flexible, slotted membrane of elastomer, a ring secures the membrane in place. Due to the disc’s unique convex shape the membrane is slightly lifted off the disc when air is supplied, therefore allowing an even distribution of the generated fine bubbles. The membrane can be delivered in different rubber (EPDM) qualities and slot patterns (HL, SL) according to the application.