Wastewater Aeration Solutions

  1. Odor Control 2/10/2021

    Combat odor and corrosion problems in your collection system with BlueInGreen technology. Designed to eliminate sulfide production by promoting an aerobic environment, our odor control solutions offer an effective alternative to chemical treatment in force main and gravity sewers. 

    BlueInGreen odor control solutions are designed to eliminate sulfide production by promoting an aerobic environment, an effective alternative to chemical treatment. 

  2. Sanitaire ICEAS® Advanced SBR Technology by Xylem 9/9/2009

    Sanitaire has provided the wastewater treatment industry with innovative and cost-effective treatment technologies for over 35 years. This tradition continues with the Sanitaire Intermittent Cycle Extended Aeration (ICEAS) process, which is an advance sequencing batch reactor (SBR) technology for municipal and industrial wastewater treatment.

  3. Aire-O2 Mixer 2.0 5/12/2020

    Mixer 2.0 is here!
    The Aire-O2® Mixer 2.0 ensures simple, nearly maintenance-free operation with above surface float or fixed mounting options. The variable angle mixer performs in corrosive environments with no gearbox and low power consumption in aeration tanks, oxidation ovals, digesters, lagoons, anoxic basins, and chemical mix tanks

  4. OxyStream™ Oxidation Ditch 1/8/2015

    The OxyStream™ Oxidation Ditch from WesTech Engineering has proven to be the ideal equipment for biological wastewater treatment applications throughout the world. It combines vertically mounted, low-speed surface aerators with an oxidation ditch design to maximize oxygen transfer efficiency while maintaining the greatest flexibility for power turndown. In addition, the OxyStream™ has greater side water depths and fewer required aerators than a conventional brush rotor or disc rotor oxidation ditch. The vertical slow-speed surface aerator eliminates maintenance-prone horizontal shafts, pillow block bearings, and drive units near the water surface. Above all, the OxyStream™ Oxidation Ditch provides energy savings and produces predictable, high-quality effluent.

  5. KLa Systems Jet Aerator 10/28/2008

    The high-alpha factor and clean water oxygen transfer performance of KLa’s jet aeration technology results in low energy costs and reduced off-gas volume for industrial and biosolids applications.

  6. Deep Water Aeration 11/9/2010
    Diffused air is a simple concept which entails pumping air through a pipe or tubing and releasing this air though a diffuser below the water’s surface.
  7. Directional Jet Manifold Aerators 6/18/2008
    The Mass Transfer Systems directional jet aerators are designed with jet aeration nozzles installed on only side of the liquid / air jet aeration manifold. This configuration is most applicable for round tanks, lagoons, and ditches where directional flow patterns can be achieved to aid in the mixing of the tank contents.
  8. Kynar PVDF Jet Aerator For Improved Wear Resistance 5/4/2015

    Ten years ago, KLa Systems was presented with the challenge of finding a more wear-resistant material for our jet aeration nozzles and decided to upgrade to Kynar PVDF, which is extremely chemical and wear resistant.

  9. Nitrogen-Reduction Treatment Systems For Long-Term Operations 4/20/2020

    The need for of nitrogen-reducing wastewater treatment systems has become more common in the past few decades due to various environmental concerns, including eutrophication, oxygen depletion, and toxicity to aquatic organisms in lakes and streams. The addition of nitrogen removal to any wastewater treatment plant, new or existing, typically increases the costs of the project significantly. When evaluating suitable technologies, it becomes critical to properly identify processes that can not only proved the best upfront capital value but also provide the most sustainable long-term functionality.

  10. Industrial Mixing and Aeration 1/14/2009
    Applicable industries: Power Plants • Refineries • Chemical Plants • Mining