Wastewater Aeration Solutions

  1. Tri-Oval® Oxidation Ditch System 9/3/2020

    The Tri-Oval® Oxidation Ditch System, named for our Aire-O2 Triton® in an oxidation oval, is a subsurface complete mix, looped reactor system that is ideal for municipal and industrial wastewater treatment facilities. The energy efficient Aire-O2 Triton TR Series process aerator/mixer, combined with an optimized control strategy, allows for operation at depths as low as 4ft (1.2m) and up to 33ft (10m).

  2. Winery Wastewater Treatment Systems 3/31/2014

    ClearBlu installs the most effective winery wastewater systems available. We are a design/build contractor. Utilizing biodigester technology, our capital costs for systems are significantly lower than other systems. Why? Because we are not utilizing municipal wastewater system technology to treat winery waste. They represent two different problems.

    Winery waste water contains sugars and grape organics. This narrow profile means that it is easier to treat. Typically engineering firms will spend 10’s or 100’s of thousands of dollars designing systems that are overly complex, very costly to install, difficult to operate and expensive to maintain. By focusing on the content of the waste stream, ClearBlu installs systems with much smaller footprints. If ponds are utilized, less than 24% of the acreage engineers require will be needed. We eliminate chemical usage by eliminating DAF and SAF systems.

  3. PMSL's PSA Series - Aerators & Mixers 12/21/2006
    Philadelphia Mixing Solutions has specifically designed the PSA withstand heavy-duty loads
  4. Submersible Aerator Mixer Type ABS OKI 8/2/2018

    The OKI submersible aerator is a heavy-duty, non-clogging, gentle mixing unit which can operate both as an aerator and as a mixer for wastewater and water treatment in municipal and industrial plants. It is used for sludge stabilization in SBR, MBR, and MBBR processes.

  5. TumbleOx™ Nitrification Reactor 6/11/2020

    The Parkson TumbleOx™ Bioreactor consists of a treatment tank(s) containing a series of slowly rotating drums. Each drum is partially filled with loose media which freely tumbles inside the five-foot diameter drum as it rotates. A thin biofilm grows on the media and provides biological treatment. The unique media design maximizes surface area for biological growth and also aerates the wastewater as the drum turns, providing dissolved oxygen for the micro-organisms. The system components include the rotating drum, plastic media, and the bearings and simple drive mechanism to slowly rotate the drum. No supplemental aeration system is required.

  6. Replace Aging Brush Rotors With Envirex® Disc Aerators 11/21/2014

    Improved oxidation ditch mixing efficiency, lower energy use, and reduce maintenance with Envirex® Disc Aerators from Evoqua. Envirex disc aerators fit all existing single or multichannel oxidation ditch applications with little or no modification required.

  7. Aqua-Jet® SS-PW Aerator for Drink Water Applications 1/10/2005

    Aqua-Jet® aerators are installed in a wide variety of wastewater treatment schemes including activated sludge systems such as SBRs, MSBRs and extended aeration, as well as aerobic digesters, sludge holding, and equalization basins. It is also UL approved for TTHM stripping in potable water applications.

  8. KLa Systems Total System Responsibility 3/17/2014

    A typical system consists of the Slot Injector™ aerators, jet mixers or jet aerators complete with in-basin piping system, back-flush system, liquid recirculation pumps, and air blowers.  The pumps supplied are either end suction centrifugal, submersible, or self-priming. Low pressure air is delivered by positive displacement blowers, screw compressors, multi-stage or high speed centrifugal blowers.

  9. Aqua-Jet II 9/11/2025

    The Aqua-Jet II® contained flow aerator is designed and manufactured with the same expertise and quality workmanship as the industry renowned Aqua-Jet® aerator. The 304 stainless steel volute and intake cone are standard features of the Aqua-Jet II. A one-piece motor shaft of 17-4 stainless steel and dynamically balanced propeller of 316 or 15-5 stainless steel are also standard. The dome shaped cover assembly is constructed of fiberglass reinforced polyester (FRP) for spray control.

  10. BIOSTYR® Biological Aerated Filter 10/1/2005

    BIOSTYR® is a simple and innovative process, which carries out effective biological treatment of residual water at minimum operating cost. Highly compact, BIOSTYR® combines (in a single structure), the biological reactor that degrades pollution and the phase separation that removes the matter transformed by purification.