Wastewater Disinfection PRODUCTS
-
Emergency Chlorine Scrubbers
11/18/2016
IMS Wet Emergency Chlorine Scrubber Systems are designed to contain and treat accidental releases of chlorine gas. Systems are offered to treat up to 3 tons of chlorine gas. The IMS wet emergency chlorine scrubber is a three-stage single-pass chemical absorption system with very high efficiency horizontal packed bed sections. An induced draft fan pulls the chlorine gas through the scrubber, where it contacts a recirculation caustic solution. The scrubber system is factory pre-assembled, complete with induced draft fan, recirculation pump, instrumentation and controls.
-
Capital Controls® CHLOR-A-VAC® Series 1520 Chemical Industion Unit
10/15/2015
The Series 1520 CHLOR-A-VAC® affords high efficiency addition and mixing of gases and liquid chemicals resulting in substantial chemical cost savings.
-
RapiSand™ Ballasted Flocculation System
7/23/2015
The WesTech RapiSand™ ballasted flocculation system is a high-rate clarification process combining rapid mixing and multi-stage flocculation, followed by sedimentation. RapiSand™ sedimentation is extremely fast and can be applied in a wide variety of suspended solids removal applications.
-
ETS-UV™ For Wastewater Treatment
2/4/2014
Many municipalities had adopted ultraviolet (UV) disinfection treatment over chemical based disinfection. UV disinfection is efficient, low cost and an environmentally friendly way to disinfect water. The process is safer for operators and the community; UV is a chemical free process that adds nothing to the water but light. Read more about how the UV disinfection works. Unlike chlorine, UV disinfection is able to inactivate pathogens such as Giardia and Cryptosporidium. Discharged wastewater with these pathogens becomes dangerous drinking and recreational water for downstream communities.
-
Model 420-Cylinder Mounted Regulator
5/16/2016
The JCS Industries Model 420-Cylinder Mounted Regulator is designed for years of safe and reliable service.
-
GS1440 Sensor H2S
7/8/2024
Water or air, measure H2S where it matters – right at the source.
-
Liquid Analytical Measurement
3/27/2019
Environmental protection, consistent product quality, process optimization and safety – just a few reasons why liquid analysis is becoming increasingly essential. Liquids such as water, beverages, dairy products, chemicals and pharmaceuticals have to be analyzed day in and day out. We support you in fulfilling all these measuring tasks with application know-how and cutting-edge technologies. Discover our comprehensive portfolio and choose the product best suited to your process needs.
-
NeoTech D438™
4/16/2014
The NeoTech D438™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.
-
Model 4180 All Vacuum Chemical Feeder
5/16/2016
The JCS Industries Model 4180 All Vacuum Chemical Feeder is for operations that require high efficiency, accuracy, control and safety. The Model 4180 will feed chlorine dioxide solution used in municipal and industrial water treatment systems.
-
Model 4200-EC Gas Vacuum Feeder Controller
7/15/2016
The JCS Industries Model 4200EC Gas Vacuum Chemical Feeder mixes and feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely. The system is comprised of a vacuum injector to safely introduce the gas into the feed-water stream, a reversing servo motor coupled with a V-notch valve to regulate the chemical flow rate, and a control module for complete electronic control and communications.