Wastewater Disinfection PRODUCTS

  1. Constant Chlor® MC5 Feeder 1/11/2021

    The Constant Chlor® MC5 Feeder system provides reliable chlorine solutions for water treatment plants, waste water plants and water reclamation facilities. The Constant Chlor® system consistently delivers liquid available chlorine for disinfection applications that kills bacteria, controls algae and removes organic contaminants. The feeders use EPA registered Constant Chlor® Briquettes that work in conjunction with the feeder to produce a fresh concentrated liquid chlorine solution for clean, clear, sanitized water. Treats facilities with up to 10 MGD ranging from a minimum of 5 lbs a day available chlorine to 83 lbs a day available chlorine.

  2. Ozone Destruction System 4/16/2014

    NeoTech Aqua Solutions’ line of 254 nm wavelength low-pressure lamps effectively destroys residual ozone and a member of our technical staff will professionally size your UV system. 

  3. GENCLEAN Muni 2/18/2021

    GENCLEAN™ Muni is an NSF 60 certified specialized advanced oxidation treatment solution for potable drinking water and domestic wastewater treatment plant facilities.

  4. Capital Controls® Series 1041A Automatic Switchover 10/22/2015

    The Automatic Switchover system Series 1041 provides safe, reliable switching between two gas (pressure or vacuum) or two liquid (pressure or level) sources assuring an uninterrupted supply of chemical to the application. Automation of all functions (switchover, system initialization, configuration, lamp test, and safety functions) is done with an internal programmable logic controller for operational flexibility, enhanced reliability, and ease of use. If needed, local manual override is conveniently available for operator control to maintain continuous operation.

  5. Model 4200-EC Gas Vacuum Feeder Controller 7/15/2016

    The JCS Industries Model 4200EC Gas Vacuum Chemical Feeder mixes and feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely. The system is comprised of a vacuum injector to safely introduce the gas into the feed-water stream, a reversing servo motor coupled with a V-notch valve to regulate the chemical flow rate, and a control module for complete electronic control and communications.

  6. Capital Controls® Gas Feeder Series WM4000 10/12/2015

    Capital Controls Series WM4000 gas feeders are wall cabinet mounted vacuum operated and designed to conveniently house a combination of gas feed equipment. The fibreglass cabinets enclose the gas flow control components.

  7. UVAS Plus sc UV Sensor 5/14/2024

    Continuous UV 254 Absorbance/Transmittance measurements can be used to protect plant treatment processes from high organic loads. Analysis range of 50 mm probe is 0.01 - 60 m-1. Use for the following applications: protection of treatment plants from industrial dischargers, monitoring shock loads from internal plant processes, control of activated sludge processes, control methanol feed in BNR based on organic loading, final effluent monitoring and monitoring efficiency of UV disinfection processes.

  8. 3-Way Valve 4/1/2015

    The 3-Way Valve is available in 4”, 6” and 8” sizes and is available as a stand-alone valve or as part of a Vaughan submersible or vertical wet-well Chopper Pump. The valve is a non-plug design using a rotatable CD-4MCu valve disc to allow discharge out of either of the top ports.

  9. Rental, Emergency, Bridge And Supplemental Solutions 1/10/2024

    For just about any water problem, Newterra has you covered. If you’re looking for medium or short-term water or wastewater treatment solutions, Newterra has a large, in-stock inventory of solutions that are available to rent. From supplemental aeration to reverse osmosis systems to pressure vessels and complete wastewater treatment systems, our temporary ownership and rental solutions can save precious capital while solving a critical need. Newterra offers flexible terms and conditions to suit any customer.

  10. CHEM-FEED® CFWS-1 – The Wall Mount Skid For Limited Floor Space Installations 6/3/2022

    CHEM-FEED Wall Mount Skid Systems were designed and engineered using solid modeling tools for superior piping installation and easy component maintenance. Every skid is completely assembled, tested, and shipped directly to you.