Wastewater Disinfection PRODUCTS

  1. NeoTech D322™ 4/16/2014

    The NeoTech D322™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.

  2. 3-Way Valve 4/1/2015

    The 3-Way Valve is available in 4”, 6” and 8” sizes and is available as a stand-alone valve or as part of a Vaughan submersible or vertical wet-well Chopper Pump. The valve is a non-plug design using a rotatable CD-4MCu valve disc to allow discharge out of either of the top ports.

  3. Small Tank Mixing 4/2/2015

    Small tank mixing is a lower cost, simplified Rotamix system, using a Chopper Pump and external-mount nozzle assemblies. The external-mount nozzles are sandwiched between 6" ANSI flanges and provide fixed discharge angles off the tank wall.

  4. NeoTech D338™ 4/16/2014

    The NeoTech D338™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.

  5. ClorTec® Inspection And Maintenance Program 10/6/2015

    De Nora Water Technologies has developed a comprehensive preventative inspection and maintenance contract program for our ClorTec® on-site sodium hypochlorite generation system.

  6. NeoTech D328™ 4/16/2014

    The NeoTech D328™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.

  7. GWT Zeroturb Bio-Organic Liquid Flocculant 2/18/2021

    GWT advanced ZeoTurb™ is a unique advanced bio-organic liquid flocculant.

  8. GS1440 Sensor H2S 7/8/2024

    Water or air, measure H2S where it matters – right at the source.

  9. Foambuster 4/1/2015

    The patented Foambuster uses the same glass-lined ductile iron nozzles as Rotamix but also uses a stainless steel splashplate located below the nozzle to deflect the nozzle discharge and create a broad spray of sludge, which wets and breaks up foam forming on the surface of the digester. Digester sludge is pumped through the Foambuster either by the Rotamix Chopper Pump or by a separate Chopper Pump. When the Foambuster is used in conjunction with a tank mixing system, which produces a rotational mixing pattern in the tank, only one spray nozzle will be required for effective foam control.

  10. Disinfection 8/9/2024

    As the final step before treated wastewater leaves the plant, effective disinfection is extremely important to protect human health, and the maintenance of the environment. This process eliminates pathogenic organisms that cannot be removed by previous treatment steps and reduces the spread of pathogens in the natural ecosystem.

    USP’s current offerings include our unrivaled in-house CFD modeling expertise that can be used to optimize the injection, mixing and feed rates of PAA to meet the disinfection requirements of a facility. Also, launching later this year, is our OaSys iCT™ is a novel control approach that optimizes disinfection performance by calculating the optimal chemical dosage that accounts for sources of treatment variability in real time. Available for use with PAA or chlorine.