Drinking Water Flow Control and Measurement Products
-
Capital Controls® Series 600 Gas Chlorinator
10/15/2015
De Nora Water Technologies developed the direct gas-pressure chlorinator for applications where electricity, used to operate a booster pump, and water pressure, required for ejector vacuum operation, are unavailable.
-
Capital Controls® Series 71P11A Gas Pressure Reducing Valve
10/15/2015
The Series 71P11A Gas Pressure Reducing and Shutoff Valve is a diaphragm-type gas pressure regulating valve designed for use on chlorine, sulfur dioxide and ammonia gas service. The valve is used in a gas dispensing system to prevent liquefaction of the gas by providing a controlled pressure drop in the piping system. Downstream pressure is regulated to a reduced value by adjustment of the control setting. If the downstream pressure exceeds the pressure at which the valve is set, gas flow will be shut off.
-
Capital Controls® Gas Feeder Series WM4000
10/12/2015
Capital Controls Series WM4000 gas feeders are wall cabinet mounted vacuum operated and designed to conveniently house a combination of gas feed equipment. The fibreglass cabinets enclose the gas flow control components.
-
Capital Controls Series 480 Vacuum Gas Feeders
10/8/2015
The Capital Controls Series 480 all-vacuum gas feeder is designed for direct mounting to a 150 pound gas cylinder or ton container. It is a basic alternative for those applications requiring a chlorine feed rate of 250 PPD (5 kg/h) or less.
-
Capital Controls® Series 200 Vacuum Gas Feeders
10/8/2015
ADVANCE™ Series 200 gas feeders are designed for or automatic gas regulation. Automatic operation requires a simple addition of a motorized control valve.
-
Capital Controls® VEGA™ Gas Chlorinator Vent Exhaust Gas Arrestor
10/6/2015
The Capital Controls® VEGA™ is a disposable chlorinator vacuum regulator vent gas arrestor designed to treat occasional chlorine gas vent releases that may accompany chlorine container changeovers and fouled vacuum regulator inlet valves. The field tested VEGA prevents nuisance tripping of chlorine room air sensor alarms; helps compliance with local, state and federal code restrictions against exhausting chlorine fumes outside of a building; keeps the building free from chlorine related acid corrosion.
-
FLUXUS® F401 Portable Flow Meter
12/9/2014
The FLUXUS® F401 is FLEXIM's dedicated single channel portable flow meter for applications in the municipial water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas outdoor - being ideal for water loss activities prescribed in AWWA M-36.
-
FLUXUS ADM 5107 Water Flowmeter
12/9/2014
The FLUXUS ADM 5107 is FLEXIM's solution for many flow metering applications found in the water and wastewater sector and adjacent industries. As FLEXIMs basic and economic alternative, the ADM 5107 offers the same benefits in terms of accuracy and reliability as its bigger brothers, the FLUXUS ADM 7407 and ADM 8027.
-
FLUXUS F704 Ultrasonic Flowmeter
12/9/2014
With one or two flow channels and versatile electrical inputs and outputs, the FLUXUS F704 can optimally be configured to your application needs, measuring and handling a variety of process parameters.
-
FLUXUS F601 Portable Flowmeter
12/9/2014
The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters.