Drinking Water Treatment Solutions

  1. Signet 2750 & 2760 pH/ORP Sensor Electronics 11/15/2004

    The Signet 2750 and 2760 pH/ORP Sensor Electronics and Preamplifiers, featuring connectors, provide a variety of functions to suit various requirements

  2. CT5100 Continuous Gas Analyzer 5/26/2016

    Rosemount CT5100 continuous gas analyzer from Emerson is the world’s only hybrid analyzer to combine Tunable Diode Laser (TDL) and Quantum Cascade Laser (QCL) measurement technologies for process gas analysis and emissions monitoring. The CT5100 is available in two variants: a certified system, housed in a purged and pressurized enclosure for hazardous area installations; and a non-certified system for use in nonhazardous areas. Both can house up to six lasers to measure up to 12 critical component gases and potential pollutants simultaneously within a single system - meeting local, state, national, and international regulatory requirements. The CT5100 is a unique combination of advanced technology, high reliability, and rugged design. Its "laser chirp" technique expands gas analysis in both the near- and mid-infrared range, enhancing process insight, improving overall gas analysis sensitivity and selectivity, removing cross interference, and reducing response time. The laser chirp technique produces sharp, well-defined peaks from high resolution spectroscopy that enable specificity of identified components with minimum interference and without filtration, reference cells, or chemometric manipulations.

  3. Zero Liquid Discharge 1/12/2006
    Zero Liquid Discharge (ZLD) technologies by Aquatech help you achieve environmental compliance, reduce your carbon footprint, create positive public perception, and recover high purity water for reuse.
  4. Capital Controls® CHLOR-A-VAC® Series 1420 Chemical Industion Unit 10/15/2015

    The Series 1420 CHLOR-A-VAC® affords high efficiency addition and mixing of gases and liquid chemicals resulting in substantial chemical cost savings.

  5. Rugged Oil/Water Interface Meters 11/18/2011
    When working in hazardous or explosive environments, use the certified intrinsically safe Rugged Interface Meters. Choose from either a full-size meter or a backpack-size meter.
  6. GDT Mixing & Contacting Systems 5/19/2017

    The GDT Process starts with the creation of ozone from an Ozone Generator. The ozone is then drawn into a Mazzei®Venturi Injector which provides dynamic mixing (a Back Pressure Control Valve adjusts injector outlet pressure optimizing ozone mass transfer in the system). Then mixing and contacting is enhanced in a Flash Reactor.

  7. FCL Free Chlorine Measuring System 5/16/2011

    The Model FCL is a complete system that measures free chlorine in fresh water. It includes a transmitter (choice of Model 56 or Model 1056), a 499ACL-01 free chlorine sensor, a pH sensor (if required), and a constant head flow controller. The transmitter and flow controller are mounted on a back plate, and quick disconnect Variopol sensor cables are pre-wired to the transmitter, making installation and startup fast and easy.

  8. High Capacity MBR Sewage Treatment System: WWT-1000+ 5/29/2019

    This compact, easy-to-operate newterra Membrane Bioreactor (MBR) system combines activated sludge biological treatment with our advanced MicroClear™ ultrafiltration flat sheet membrane technology. The self-contained, high capacity system is comprised of four ISO-certified 40' shipping containers (high cube) and requires an area of only 15 x 15 m (excluding equalization tank/lagoon and permeate storage).

  9. Capital Controls Series 480 Vacuum Gas Feeders 10/8/2015

    The Capital Controls Series 480 all-vacuum gas feeder is designed for direct mounting to a 150 pound gas cylinder or ton container. It is a basic alternative for those applications requiring a chlorine feed rate of 250 PPD (5 kg/h) or less. 

  10. COP™ Spiral Blade Clarifier 12/21/2011

    The WesTech COP™ Spiral Blade Clarifier is the result of research and design focus on building a better clarifier. Each COP Spiral Blade Clarifier is designed for the specific process requirements of each plant.