Drinking Water Treatment Application Notes

  1. The Basics: Testing RO Quality
    4/28/2014

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached.

  2. Water Distribution System Security Monitoring
    2/5/2013

    Ensuring safe drinking water doesn’t end when the water leaves the water treatment plant. Protecting the safety and security of drinking water from accidental or intentional contamination within the distribution system is becoming increasingly important.

  3. Application Note: Busseron Creek Watershed Partnership Addresses Concerns In A Rural Watershed
    1/20/2010
    As with other watershed organizations, the Busseron Creek Watershed Partnership (BCWP) exists because of surface water quality degradation. In this case, those waters drain 163,231 acres of a watershed that crosses the boundaries of Vigo, Clay, Green, and Sullivan counties in West- Central Indiana. By YSI
  4. Free Chlorine Measurement In Drinking Water Treatment
    12/21/2005

    Before water can be used as a safe and reliable source for drinking water, it must be properly treated. Since water is a universal solvent, it comes in contact with several different pathogens, some of which are potentially lethal, and inactivation is accomplished through chemical disinfection and mechanical filtration treatment. This treatment consists of coarse filtration to remove large objects and pre-treatment which includes disinfection using chlorine or ozone

  5. Measuring The Chlorine Content In The Emergency Chlorination Of Waterworks
    12/14/2011
    Many municipal waterworks perform no permanent disinfection of drinking water. However, in many cases a process known as emergency chlorination takes place. The process is switched on in case of need, adding chlorine to the drinking water as a disinfectant.
  6. Lab Gas Sub-Metering Accuracy Improves With Thermal Flow Meters To Save Money
    12/1/2017

    Facility administrators will find the advanced ST100 Series Thermal Mass Air/Gas Flow Meter from Fluid Components International (FCI) helps them improve the accuracy of specialty gas point of use and sub-metering operations to achieve accurate billing in their labs for better cost tracking and control.

  7. Non-Contact Radar Level Meter Improves Reactor Vessel Measurement
    7/4/2013

    A North Carolina-based specialty chemical manufacturer, a major producer of insect repellent, was looking for a better way to measure the liquid level in its glass-lined agitated reactor. The company uses a number of complex technologies to manufacture sebacates, adipates, isophthalates, catalysts, alkyds, and other natural and renewable chemistries based on castor and citrates.

  8. Protecting Pumps From Dead Head Conditions
    4/6/2017

    The C445 motor management relay offers the most configurable protection options in the industry, with features specifically designed to protect critical pumps from costly damages due to dead-head and other underloaded or starved pump conditions.

  9. (E)-2-Nonenal In Beer
    4/5/2015

    Numerous compounds contribute to changes in beer flavor as it becomes stale. One of these compounds, (E)-2-nonenal, has been investigated as a major source of the papery/cardboard flavor that develops in aged beer.

  10. Validation Of Environmental Water Methods On One System
    4/6/2015

    Water quality laboratories across the nation are faced with both a rising level of water quality awareness amongst the general public, as well as rising costs in water quality monitoring. As a result, laboratories are looking for more efficient ways to provide higher quality monitoring.