Drinking Water Treatment Solutions
-
AURORA® Magnetic Level Indicator
11/15/2013
The AURORA product combines the operating system of a conventional float-based magnetic level indicator (MLI) with the leading-edge Eclipse® guided wave radar transmitter developed for level measurement applications by Magnetrol®.
-
Pressure Filters
10/15/2018
Loprest pressure filters can be provided in horizontal or vertical vessel configurations for flow rates from 50 to 5,000 GPM. The Loprest multi-cell pressure filter design produces its own backwash water, so there is no need for a separate treated water source and pumping system. The Loprest filter design has been optimized over many years for reliable, efficient, economical operation. All Loprest treatment systems are operated by a fully automated control package.
-
Pentair X-Flow
6/11/2007
The Pentair X-Flow UF membrane system provides a simple solution producing water that meets the highest standards for turbidity and micro biology
-
Determination Of Hexanal In Foods Utilizing Dynamic Headspace
4/9/2015
Hexanal is one of many well-documented aromatic components that contribute to flavor and aroma in common consumer food products containing omega-6 fatty acids. Hexanal content is also used to measure the oxidative status of foods rich in omega-6 fatty acids.
-
E33 Adsorption Systems
8/1/2016
In the adsorption process, contaminants break their bond with the water molecules and chemically adhere to a filter media. This is typically accomplished by directing the water flow through pressure vessels containing the filter media at a rate that allows enough contact time for adsorption to occur. AdEdge Water Technologies’ Bayoxide E33 adsorption media is the industry standard for arsenic removal. This granular ferric oxide media reduces up to 99% total arsenic, including both Arsenic (III) and Arsenic (V).
-
OPTIMASS 1400 Coriolis Mass Flowmeter
9/16/2019
The OPTIMASS 1400 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of standard applications with gases and liquids (up to 170,000 kg/h or 6,235 lb/min). The meter features Entrained Gas Management (EGMTM) for liquid applications, providing reliable readings even in the event of gas entrainment of up to 100%. In this way, the Coriolis meter enables continuous and uninterrupted measurement of volume flow and mass, density and temperature – even at difficult process conditions with 2-phase flow.
-
Fox Model FT1 Gas Mass Flow Meter
8/23/2016
The Fox DDC-Sensor™ is a new state-of-the-art sensor technology used in the Fox Model FT1 Thermal Gas Flow Meter. The DDC-Sensor™, a Direct Digitally Controlled sensor, is unlike other thermal flow sensors available on the market. Instead of using traditional analog circuitry, the DDC-Sensor™ is interfaced directly to the FT1 microprocessor for more speed and programmability. The DDC-Sensor™ accurately responds to changes in process variables (gas flow rate, pressure, and temperature) to determine mass flow rate, totalized flow, and temperature.
-
AquaDiamond® Cloth Media Filtration System
1/10/2005
The AquaDiamond® filter, a new horizontal configuration for the Cloth Media Filter, has been produced. It utilizes PA-13 pile cloth as its filter media.
-
Free Chlorine Measurement In Drinking Water Treatment
12/21/2005
Before water can be used as a safe and reliable source for drinking water, it must be properly treated. Since water is a universal solvent, it comes in contact with several different pathogens, some of which are potentially lethal, and inactivation is accomplished through chemical disinfection and mechanical filtration treatment. This treatment consists of coarse filtration to remove large objects and pre-treatment which includes disinfection using chlorine or ozone
-
OPTISONIC 6300 P Ultrasonic Clamp-On Flowmeter
9/16/2019
The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. As standard the clamp-on flowmeter is also provided with a measurement option for thermal energy applications.