Drinking Water Products

  1. YPrime IRT+
    3/6/2019

    YPrime’s IRT+ goes beyond traditional IRT capabilities of patient randomization and drug supply management with control and a real-time view into critical functions and flows of a clinical trial - involving patient interactions, site activities and clinical supply management.

  2. ST80 Series Thermal Mass Flow Meters
    8/1/2019

    ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics with the industry's most extensive selection of application-matched flow sensors to provide a truly superior solution for industrial processes and plant applications. The ST80 further combines these features with a robust, rugged transmitter enclosure and industry’s broadest selection of process connections to provide longest service life and ease-of-installation in your installation’s pipe or duct.

  3. Flow Measurement
    4/10/2019

    One for all - Endress+Hauser's multivariable metering. The ability to measure several process variables all at the same time opens up completely new application fields.

  4. Media Fill Inspection
    1/2/2019

    Media Fill Inspection in the pharmaceutical industry has long been based on growth media culture methods. The general approach to media fill inspection is to incubate media filled vials for 14 days and then determine potential contamination with a visual inspection of the media sample. Over the last decade a number of Rapid Microbial Methods based on various analytical techniques have been implemented. These provide quicker, more sensitive, accurate, and reproducible test results when compared with conventional, growth-based methods. Recently, it has been demonstrated that laser-based headspace provides yet another alternative approach for detecting microbial contamination in sterile pharmaceutical product. 

  5. 500 Watt CW, 10 kHz - 250 MHz Solid-State Broadband Amplifier: 500A250D
    2/27/2019

    AR’s 500A250D is a solid-sate amplifier covering the 10 kHz – 250 MHz frequency range. When used with a sweep generator, it provides a minimum of 500 watts of RF power. Like most of AR’s amplifiers, this model is ideal for applications that call for instantaneous bandwidth and high gain.

  6. NuAire In-VitroCell™ ES Model NU-5731 CO2 Incubator
    3/7/2019

    Model NU-5731 is a direct heat CO2 incubator offering 5.65 cubic feet (160 Liters) of useable growth space. Featuring an Oxygen control system, In-VitroCell NU-5731 uses nitrogen to suppress Oxygen levels in the growth chamber making it the perfect benchtop or floor standing solution for age-related studies.

  7. Liquid Ai Services
    12/18/2018

    Real Tech is advancing the digital future of water. Our new Liquid Ai data services are bringing intelligent insights to our clients’ water quality monitoring applications.

  8. Clinical Trial Management Services
    5/8/2019

    Your own dedicated project management team

    For more than 25 years, Bellwyck has been a true partner in developing smarter solutions for the pharmaceutical industry — from clinical trial to commercialization. Our consulting services start with a dedicated project management team led by a single point of contact throughout your project.

  9. Hermetic Ceramic Packaged Silicon PIN Diode Devices: APD Series
    5/17/2018

    Skywork’s Isolink APD Series is made up of silicon PIN diodes designed for use as switch and attenuator devices in high-performance RF and microwave circuits. Operating over the wide frequency range from 100 MHz to over 20 GHz with voltage ratings up to 200 V, these devices use a well-established silicon technology that results in PIN diodes with tightly controlled I-region characteristics.

  10. Heat Recovery From Compressed Air Systems
    8/20/2018

    The rise in energy prices is an unwelcome reality in today’s manufacturing environment. Energy cost reduction strategies are vital to staying competitive. Facility engineers are challenged to optimize energy efficiency and extract as much productivity out of every unit of energy paid for. Harnessing the heat from compressed air systems can greatly increase operational efficiencies and help reduce a plant’s carbon footprint.