Drinking Water Solutions

11. Electrochemical Nano Diffusion (END) 6/20/2018

    Based on proven electrodialysis reversal (EDR) technology, the END® system transforms two key components of traditional EDR to deliver maximum recovery with minimum energy consumption in numerous brackish water treatment applications.

12. Modular Onsite Storage Systems 6/26/2020

    With the high cost of infrastructure replacement and demands for more stringent environmental standards, newterra modular treatment systems are driving the adoption of decentralized solutions.

13. DE NORA TETRA™ LP Block™ Dual Parallel Lateral Underdrain 10/6/2015

    In municipal drinking water applications or pre-treatment for desalination plants using gravity filters, the filter underdrain is one of the most important components contributing to overall system performance and operation — whether a new filter design or retrofitting an existing filter.

14. Waste Technologies Transform Problems To Profit 9/8/2015

    Anaerobic digestion processes that radically improve the quality of wastewater while delivering green energy extracted from biological waste streams are emerging as a profitable way for agricultural and food processing industries cope with the twin impact of drought and pollution challenges.

15. Aria FAST Mobile Water Treatment 10/23/2024

    Aria FAST mobile water units deliver the water you need, when and where you need it. Our mobile systems are easily installed and produce highquality water in as little as four hours after utility connections are complete.

16. TrojanUVFlexAOP – Advanced Oxidation System 4/24/2020

    Meeting the demand for clean water has never been more challenging. Communities around the world are facing a growing water stress – an insufficient supply, in terms of water quality or water quantity – and often both. Many are turning to potable reuse and drinking water remediation to meet these demands. The TrojanUVFlex®AOP can be part of the solution. This UV advanced oxidation system destroys a range of chemical contaminants while simultaneously providing final treatment, helping municipalities relying on lower quality water sources to continue producing high-quality potable drinking water.

17. Water Reuse Is No Longer A Choice. It's A Necessity. 4/20/2020

    Water reuse is no longer a choice. It’s a necessity. Orenco’s AdvanTex Treatment Systems consistently produce clear effluent that meets the most stringent permit limits.

18. ShaleFlow™: A Transportable, Modular Solution For Produced Water Reuse 8/24/2016

    Veolia has developed ShaleFlow™, a cost-effective transportable solution for reuse of produced water and flowback water from hydraulic fracturing operations. This compact, modular system utilizes proven technologies designed to enable reuse with the flexibility to be moved as the field is developed.

19. Water Reuse: Solutions For Sustainability, Efficiency, And Resilient Water Systems 10/28/2025

    What is water reuse?

    Water reuse is the process of treating and reclaiming water from various sources for practical purposes, including groundwater recharge, industrial applications, wetland restoration, agricultural irrigation, public access area uses, as well as drinking water applications. By reusing water, communities can reduce dependence on traditional water supplies, avoid costly imported water from 3rd party providers, and improve resilience in water systems. Thanks to progress in water treatment technology, along with economic and regulatory incentives, water recycling has become a cost-effective and sustainable solution to meet the growing demand for highly treated water and overcome supply shortages during droughts.

    There are three primary types of water reuse: Indirect Potable Reuse (IPR), Direct Potable Reuse (DPR), and Non-Potable. In IPR reuse systems, advanced treated water is either injected into an environmental buffer (groundwater, river, or reservoir) before being extracted again for use, whereas DPR is directly blended into the drinking water treatment plant or distribution system. Non-potable water is not intended for human consumption and can be used for irrigation, industrial processes, laundry, or toilet flushing.

    Advanced treatment technologies, such as membrane filtration, reverse osmosis, ultraviolet disinfection, ozonation, and advanced oxidation processes (AOP), play a crucial role in ensuring the quality and safety of reclaimed water.

    Why reuse water? 

    As water scarcity continues to rise, water reuse is an essential strategy for creating a more sustainable future. The use of recycled water reduces the demand for freshwater sources, which are becoming increasingly scarce due to population growth, climate change, and other factors.

    Here are some key benefits of water reuse:

    • Safeguard quality and resilience: Reused water is purified well beyond drinking water standards, improving resilience and ensuring quality for both potable and even non-potable purposes.
    • Uphold safety: Treatment processes like ozone and ultraviolet light can be used to disinfect or break down complex contaminants, ensuring water is pathogen-free and concentrations are below maximum contaminant levels (MCL).
    • Ensure cost savings and efficiency: After treating a waste stream to discharge level, it may require less treatment to bring it to reuse standards, making reuse not only environmentally responsible but also cost-effective in many scenarios and locations.
    • Conserve traditional water supplies: By reusing water, we can lessen our reliance on conventional water resources like rivers, lakes, and aquifers, thereby conserving them for future generations.
    • Reduce carbon footprint: Water reclamation is often more efficient than treating a raw water resource, which can lessen environmental impact.
    • Enable versatility and customization: Advanced treatment systems are tailored to meet specific needs for a variety of sectors, including industrial, urban, agricultural, and public access area uses.

    How to reuse water 

    The major aim of every reuse project is to minimize human health risk associated with the use or consumption of reclaimed water. While the exact treatment requirements depend upon the source water quality and the reuse purpose, to be cost-effective, the treatment must be energy efficient and have a high-water yield.

    An adequate treatment design plan depends on the application the water will be used in. In non-potable applications, normally filtration and disinfection will suffice, while potable reuse generally requires a combination of advanced treatment processes such as membrane filtration, reverse osmosis, disinfection, and/or advanced oxidation.

    Xylem has brands and solutions to fit every stage of the water reuse process: 

    • beginning with the transport of raw sewage and wastewater with Xylem brands like Flygt
       
    • to secondary treatment to remove most dissolved and suspended organic matter and nutrients with brands like Sanitaire and Envirex
    • to tertiary stages that remove residual particulate matter, nutrients, TDS, and nematode eggs with brands like Leopold and Davco
    • along with disinfection and advanced oxidation that inactivates pathogens, and breaks down trace constituents and emerging contaminants of concern with brands like Wedeco, ETS-UV, ATG UV Systems, Pacific Ozone, and Wallace & Tiernan 
    • and finally, digital solutions like YSI, OI Analytical, Xylem Vue that leverage remote monitoring, alerts, and data analytics for proactive and predictive maintenance

    Based on practical knowledge from decades of combined brand experience, thousands of installations worldwide, and strengths in powerful R&D innovation, our team looks at the entire wastewater process at your plant. We will work with your consulting engineer and State regulators to integrate the right technologies to meet your intended targets. Modular design makes it easy to fit your requirements now and easily expand to meet your future needs.

    Water reuse partnership 

    Though Xylem has teams of specialists, years of expertise, deep understanding of water regulations, and a broad solutions portfolio, we understand the complexities of water systems and the potential to partner with various water treatment experts. Xylem has partnered with hundreds of different firms around the globe to ensure the most efficient and viable water systems for communities and municipalities.

    Our goal is to thoroughly understand each project, determine the best methods, and customize optimal solutions that meet local regulations and requirements while delivering resiliency, quality, and cost savings.

    Let us be your partner in making every drop count. Contact us today to discuss your project needs.

20. ReFlex™ Reverse Osmosis 8/12/2014

    Desalitech's ReFlex Reverse Osmosis systems represent a new era of water treatment efficiency. With patented CCD technology, ReFlex systems guarantee maximum water savings and waste water reduction. Desalitech systems are making the best use of water resources, offering a recovery rate of up to 98 percent plus unmatched reliability and flexibility. ReFlex Reverse Osmosis typically reduces disposal costs by 50 percent to 75 percent and energy consumption by up to 35 percent.