Drinking Water Analysis Case Studies

  1. The Smarter Water Manager
    6/14/2018

    Communities around the world are facing a growing storm. Complex challenges including water scarcity, changing demographics, extreme weather patterns, and aging or overly stressed infrastructure are colliding to threaten critical water, energy, transport, enterprise and health networks. The water industry is in the eye of the storm.

  2. FMCW Or ToF? Which Radar Level Technology Is Best For Tank Gauging In Custody Transfer Applications?
    4/9/2018

    Measuring the level of tanks used to hold fluids for custody transfer can be expensive. This is not due to the cost of the measurement instrumentation, but to what inaccurate measurements can cost the company. Picking the right instrumentation for applications is important. Which radar level technology should you choose for tank gauging in custody transfer applications? Frequency Modulated Continuous Waveform (FMCW) or pulsed Time-of-Flight (ToF or PToF).

  3. Are You Experiencing Deviation Alarms In Your High Pressure Process Vessels?
    4/9/2018

    In this white paper, learn how to decrease alarms due to redundant level devices not matching, especially in applications with high pressure and/or high temperature. The importance of Gas Phase Compensation (GPC) and how it affects level readings of guided wave radar (GWR) devices is critical. The presence of polar gas also can have an effect on the accuracy of any GWR that does not have GPC when installed in applications where high temperature or pressure is present. This paper will discuss these issues and address how to overcome them.

  4. How To Clean And Handle pH Sensors
    10/31/2017

    For a pH sensor to maintain an accurate reading, the sensor must remain clean. Specifically, the glass measuring electrode cannot become coated, and the reference electrode assembly must not become coated, plugged or otherwise contaminated by the process solution. Here’s how to clean pH sensors to ensure correct operation.

  5. Bulk Emergency Chlorine Vapor Scrubber System Restored For Oklahoma City
    9/19/2017

    As a bulk emergency chlorine vapor scrubber system approached the end of its anticipated 20-year useful life, the city engaged Integrity Municipal Systems, LLC (IMS) inspected the equipment and proposed a system refurbishment plan that would ensure proper system performance and safe storage of the 30,000 gallons of corrosive caustic soda contained within it.

  6. U Of I Urbana-Champaign Implements Remote Monitoring System
    8/23/2017

    The Utility Distribution team at the University of Illinois at Urbana-Champaign manage the water system which serves the entire campus. The University purchases water from Illinois American Water which is distributed across the campus for uses as diverse as chemistry labs, agricultural research, and competitive swimming complexes.

  7. Multi-Point Chlorination Process To Treat Raw Water Yields To A Multi-Barrier Chain Of Treatment Technologies
    4/11/2017

    For decades, a Winnipeg utility used a multiple point-chlorination process to treat raw water drawn from remote Shoal Lake. Concerns eventually arose about the potential presence of chlorine-resistant pathogens–Crytosporidium and Giardia–and residual disinfection byproducts, which coincided with encroaching development near the lake. The Clari-DAF system was selected and now removes 70 percent of the organics at the Winnipeg plant, which also improves filtration and extends the intervals between filter backwashes.

  8. Ozone Vent Gas For Aeration At Wastewater Plant Expansion In China
    6/17/2016

    The Jimo, China, municipal wastewater plant was originally designed to treat a combination of municipal and textile wastewater (120,000 m3/d) with Class IB effluent limits for BOD, COD, ESS, TN, NH3-N and TP.

  9. Carbon Dioxide For pH Control Of Landfill Leachate
    6/16/2016

    A landfill operator’s leachate treatment plant in Missouri required pH reduction following lime-softening and prior to the biological wastewater treatment process. Carbon dioxide (CO2) was chosen as a substitute for sulfuric acid due to improved process control and a reduced tendency to form scale.

  10. In-Situ Oxygenation System Enables Increase In Capacity For Municipal Wastewater Treatment Facility
    6/16/2016

    To increase capacity within the existing footprint of a wastewater treatment facility in Michigan, two existing tanks were converted to aeration tanks with pure-oxygen aeration provided by Praxair’s In-Situ Oxygenation (I-SOTM) System.