Wastewater Solutions

  1. Ultrapen™ PT2 pH And Temperature Pen 6/10/2022

    The PT2 is a rugged, lab-accurate water quality pocket tester with simple, one-button functionality.

  2. PISTA® TURBO™ Grit Washer 11/5/2018

    The PISTA® TURBO™ Grit Washer uses TRI-CLEANSE TECHNOLOGY™ to produce clean grit while minimizing the odor caused by putrescible organics and the costs associated with growing landfill restrictions. Smith & Loveless’ PISTA® TURBO™ Grit Washer featuring TRI-CLEANSE TECHNOLOGY™ boasts a sleek, compact design with a similar footprint to S&L’s screw conveyor.

  3. Insta-Valve 20-24 Insertion Valve For 20-24 Inch Pipes 7/9/2019

    As the latest addition to Hydra-Stop’s award-winning Insta-Valve family of solutions, customers with 20- and 24-inch pipes can now benefit from the only insertable gate valve with the superior performance and reliability you would expect from the Insta-Valve name.

  4. Pumps - Air Diaphragm 1/5/2010

    Ideal Usage of Air Diaphragm Pumps: Sludge and slurries, flood control and dewatering situations associated with refineries. Applications where compressed air is available.

  5. Pentair Fairbanks Nijhuis VTSH & VTSH-SCR Series Vertical Turbine Solids Handling Pumps 3/13/2025

    Fairbanks Nijhuis VTSH vertical turbine solids-handling pumps have proven experience in the pumping of solids, slurries and sewage. These pumps are specifically designed to pass solids, sludge, trash and long, stringy materials.

  6. OPTISONIC 3400 Ultrasonic Flowmeter 9/16/2019

    The OPTISONIC 3400 is a 3-path ultrasonic inline flowmeter designed for a wide range of standard or more demanding process applications with homogeneous, non-viscous aqueous liquids as well as viscous fluids of up to over 1000 cSt. It is also the perfect choice for applications with cryogenic products (as low as -200°C / -328°F), media with extended temperature ranges (up to +250°C / +482°F) as well as low or extreme pressure ratings. The OPTISONIC 3400 offers a broad range of diameters – from DN25 / 1" for dosing purposes to DN3000 / 120" for water transportation pipelines.

  7. Aire-O2® Halo© Surface Aerator 3/17/2021

    Designed to maximize the two most important functions of any aeration device: oxygen transfer and mixing.

  8. Reactor Clarifier™ Solids Contact Clarifiers 6/14/2011
    Flocculation and Clarification Combined in a Single Tank Reactor Clarifier solids contact units are designed and built to provide the most economical solution to precipitation and clarification requirements.
  9. A Sustainable Solution For Wastewater Treatment 7/21/2017

    Proven, Dependable, Scalable

    Orenco’s AdvanTex® AX-Max™ Treatment Systems are a dependable, proven technology for treating domestic-strength, primary-treated effluent to better-than-secondary standards, including nitrogen-reduction. They consist of sturdy, watertight fiberglass tanks that incorporate recirculation-blend and discharge tankage in a single module. Each unit also includes pumping systems, ventilation, and a lightweight, highly absorbent, engineered textile media that treats a tremendous amount of wastewater in a small space.

    Applications

    AX-Max Treatment Systems are intended for large residential applications or for commercial and municipal applications that require advanced secondary treatment. They eliminate the need for separate recirculation and discharge tanks by performing both functions within a single module. AX-Max units are ideal for subdivisions, “fringe” development, hotels, resorts, schools, churches, businesses, manufactured home parks, RV parks, campgrounds, rest areas, and truck stops.

    Flows

    Depending on model, a single AdvanTex AX-Max unit can treat flows of 5000-15,000 gpd (18.9-56.8 m3/day). AdvanTex Treatment Systems are modular, however, and can be installed in multi-unit arrays to handle higher flows.

  10. Lab Gas Sub-Metering Accuracy Improves With Thermal Flow Meters To Save Money 12/1/2017

    Facility administrators will find the advanced ST100 Series Thermal Mass Air/Gas Flow Meter from Fluid Components International (FCI) helps them improve the accuracy of specialty gas point of use and sub-metering operations to achieve accurate billing in their labs for better cost tracking and control.