The new generation of ABB’s total plant automation: DCS and SCADA for the power and water industries.
The basic principle of the HUBER SRT system is drying of sludge in a solar greenhouse using the available solar radiation. A special sludge turning system performs both spreading and turning of the sludge as well as its transport from one side to the other.
Sampling has never been this easy.
The JCS Industries Model 4200EC Gas Vacuum Chemical Feeder mixes and feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely. The system is comprised of a vacuum injector to safely introduce the gas into the feed-water stream, a reversing servo motor coupled with a V-notch valve to regulate the chemical flow rate, and a control module for complete electronic control and communications.
The patent pending Floor Washer System is the Foambuster nozzle/deflector, but with the deflector rotated from below the nozzle to above the nozzle. The inverted splashplate spreads nozzle flow out across a floor in a fairly wide path to wash settled grit, sand or debris into a sump where it can be pumped out by a dewatering chopper pump. The Floor Washer System is particularly useful for attacking deposition problems in Combined Sewer Overflow (CSO) tanks, storm collection tanks, equalization tanks, lift stations, and influent channels.
The Insta-Valve 250 Patriot insertion valve provides an immediate control point in distribution systems, without using a system-wide shut down. Installed under pressure, up to 250 psi, the Insta-Valve 250 Patriot increases operator safety, limits environmental impact, and saves up to 100% of the costs related to system shutdown.
The Aztec 600 Ammonia Analyzer AW632 offers reliable and accurate on-line analysis of ammonia and ammonium ions up to 3 ppm NH3.
The Biolac® System is a well-accepted biological wastewater treatment process with over 30 years of experience and hundreds of successful installations treating municipal and industrial wastewater. Using an innovative long sludge age, activated sludge process, the Biolac® System provides an extremely simple and cost-effective solution for many treatment applications.
The Series 71P11A Gas Pressure Reducing and Shutoff Valve is a diaphragm-type gas pressure regulating valve designed for use on chlorine, sulfur dioxide and ammonia gas service. The valve is used in a gas dispensing system to prevent liquefaction of the gas by providing a controlled pressure drop in the piping system. Downstream pressure is regulated to a reduced value by adjustment of the control setting. If the downstream pressure exceeds the pressure at which the valve is set, gas flow will be shut off.
|
|
|
|
|
|
|
|
|