Wastewater Membranes Resources
Design And Care Of Reverse Osmosis Systems, Part 3: Operation And Monitoring
Reverse osmosis (RO) systems offer power plant owners and operators a reliable and well-proven water treatment solution. However, designing and caring for an RO system requires a thorough understanding of a plant’s water supply and the technology’s capabilities. The final article of this three-part series will address RO system operation and maintenance best practices.
Is A Containerized Treatment System Right For You?
As industrial facilities continually look for ways to reduce capital costs and decrease installation timelines associated with water treatment and other systems, the practice of containerizing equipment has become more prevalent. A containerized system offers many benefits of lower costs than comparable field erected buildings, faster timelines, and lower field installation requirements.
Design And Care Of Reverse Osmosis Systems, Part 2: Upstream Equipment
The success of a new reverse osmosis (RO) membrane system is often directly related to its pretreatment. The previous section of this article discussed RO design issues and introduced how a pilot study should include a study of its probable pretreatment equipment since the pretreatment performance will directly affect the performance of the RO system. However, piloting the upstream processes can be challenging in sizing these components for the pilot RO unit’s low flow rate.
Design And Care Of Reverse Osmosis Systems, Part 1: Design
Reverse osmosis (RO) systems offer power plant owners and operators a reliable and well-proven water treatment solution. However, designing and caring for an RO system requires a thorough understanding of a plant’s water supply and the technology’s capabilities. Part one of this series will review the importance of water samples and pilot studies as plant engineers begin to design an RO system to match their needs.
Savings Helps MABRs Gain Traction In Municipalities
An MABR is essentially a biological wastewater treatment process that utilizes seemingly passive aeration through oxygen-permeable membranes. Oxygen transfer through the MABR membranes is diffusion based: driven by concentration differences such that oxygen passes from air at atmospheric pressure into water at a higher hydrostatic pressure. This oxygen transfer mechanism, wherein air is supplied to the process at very low pressure, is the reason MABRs have significantly lower energy consumption compared to other wastewater treatment processes, such as conventional activated sludge (CAS), that utilize diffusers. This energy savings is one of the key reasons MABRs are gaining traction in the municipal wastewater industry.
Membrane Technologies In Containerized Units Allow For Installation In A Small Footprint
After an international tender process, the Israel Electric Company (IEC) chose Fluence to design, manufacture, and supply containerized ultrapure water production systems for use as makeup water for heat-recovery steam generators (HRSG) and for NOx emission reduction at recently upgraded power plants across Israel. More than 15 units of 20 m3/h production modules, each fitted in two 40-foot shipping containers, were provided to seven power plants. Their compact design allowed for ease of installation, operation, and maintenance while meeting the customer’s demanding engineering standards.
Addressing Fouling Challenges In Water Treatment With RO Membrane
Reverse osmosis (RO) membranes are widely used in potable water, wastewater, and industrial applications. However, a major issue in the application of RO membrane technology for desalination and wastewater reclamation is membrane fouling. It limits operating flux, decreases water production, and increases power consumption. Membrane fouling also increases the need for RO plants to perform periodical membrane CIP procedure. These problems decrease process efficiency, increase operation cost, and raise environmental issues related to the CIP solutions disposal.
Exploring RO’s Inner Net
A deep dive into reverse osmosis (RO) elements reveals the importance of feed channel spacers for optimal membrane filtration system performance.
MABR Is The Big Cheese For This Dairy Farming WWTP
Hayogev is a residential development in the rural area of Jezreel Valley, with 1000 homes, agricultural fields and dairy farms. Located in an open field next to small farms, the local treatment facility handles wastewater from HaYogev and Midrach Oz. The customer was looking for a localized wastewater treatment solution to replace the existing pond system, which faced difficulties in treating the wastewater due to high levels of nutrients. A new state-level regulation concerning reclaimed water required the wastewater treatment plant (WWTP) operator to reduce the nutrients in the effluent stream. The solution had to be odorless and quiet, have low power consumption, and use the existing pond and structure.
Denitrification Technology Significantly Improves Polluted Chesapeake Bay Watershed
The 64,000 sq ft Chesapeake Bay Watershed includes parts of MD, VA, WV, PA, and NY. Of the 1,000s of WWTPs supporting nearly 18 million people in the watershed, 470 are designated by EPA as significant sources of nutrients and TSS. Algal blooms reduce DO levels in the water, killing plant and animal life — from marsh grasses to blue crabs to rockfish. Learn how De Nora TETRA Denite technology is treating 450+ MGD in the Bay.