Wastewater Measurement Solutions
-
TransPort PT900
12/13/2021
What happens when you combine the proven track record of the TransPort® PT878 (TransPort PT900’s powerful predecessor) with the latest technology? You get performance, productivity, and a better user experience. The TransPort is the next evolution, and it’s here to make your job easier than ever.
-
AquaTrans™ AT600
12/13/2021
The AquaTrans AT600 liquid flow ultrasonic transmitter combines state-of-the-art flow measurement capability with a low-cost transmitter package that can be installed right at the process measurement point. It’s designed specifically for water and wastewater applications in full pipes. The all-digital AquaTrans AT600 has no moving parts and requires minimal maintenance.
-
A Non-Intrusive Solution For Measuring Wastewater Flow In A WWTP's Iron Pipes
12/13/2021
A municipal association needed to understand if wastewater was being equally distributed across two cast iron pipes within its wastewater treatment plant. Learn how clamp-on ultrasonic measurement helped successfully measure the flow.
-
Oxygen Content In Wastewater Digester Gas
12/13/2021
In wastewater treatment, aerobic digestion enables plants to increase their capacity by injecting oxygen into the wastewater head space.
-
Biogas Measurement From Wastewater To Power Plant
12/13/2021
Stockholm water company produces biogas from their wastewater facility which feeds Scandinavian Biogas for energy production. As they need to accurately meter what they sell to the energy facility they used a project contractor firm to engineer and define the best solution for the project.
-
Wastewater Treatment Facility Complements On-Line Monitoring With Automated Control
12/13/2021
The Minnesota River Valley Public Utilities Commission (MRVPUC) provides wastewater treatment for the City of Le Sueur and the City of Henderson in south-central Minnesota. Its wastewater treatment plant serves a domestic population of about 4,500; however, more than 50 percent of treatment plant influent flow and load consists of industrial waste. This unusually high percentage of industrial load often results in large, unexpected volumes to the system. A significant factor is the highly varying phosphorus load that challenges operators to meet the utility’s annual average discharge limit of 1.0 mg/L total phosphorus.
-
North Las Vegas Puts Advanced Wastewater Treatment To Work
12/13/2021
The North Las Vegas Water Reclamation Facility treats an average of 17 million gallons a day (MGD) of wastewater through an advanced nutrient removal process with subsequent membrane filtration. The utility’s process control enables treatment effluent exceeding typical environmental standards and allows discharge to Lake Meade, where it subsequently is withdrawn and fully treated by other facilities for drinking water distribution.
-
Reduced Bore Electromagnetic Flowmeter
10/29/2021
Being able to accurately measure both the quantity and rate of water passing through a water distribution system is crucial to gain an informed understanding of overall efficiency. As such, achieving a measurement that is exact as possible can have a significant impact on key areas. This includes supply planning, maintenance, resource deployment, leakage detection and the overall environment.
-
Textile Manufacturing
10/29/2021
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.
-
Automatic Rinse Tank Controls
10/29/2021
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored.