Wastewater Measurement Application Notes

  1. Determination Of EN15662:2008 - Determination Of Pesticide Residue In Food Of Plant Origin, By An Automated QuEChERS Solution
    9/24/2014

    Pesticide residue laboratories are required to undertake analyses of an ever increasing number of samples. The analyses typically involve use of multi-residue methods (both GC-MS and LC-MS) to test for over 500 pesticide residues.

  2. Determination Of Pesticide Residues In Honey, By An Automated QuEChERS Solution
    9/17/2014

    The QuEChERS (Quick-Easy-Cheap-Effective-Rugged-Safe) sample extraction method was developed for the determination of pesticide residues in agricultural commodities.

  3. Reducing Total Phosphorus In Water Resource Recovery Facilities
    9/10/2014

    Monitoring phosphate during the wastewater treatment process allows for fine-tuning and optimizing chemical dosing for removal of phosphate, which provides significant cost savings to the plant while protecting the aquatic environment downstream of the facility.

  4. Alcoholic Beverage Fusel Alcohol Testing With Static Headspace
    9/2/2014

    A static headspace method was developed using Teledyne Tekmar automated headspace vial samplers to meet the method requirements of the Alcohol and Tobacco Tax and Trade Bureau of the US Department of the Treasury (TTB) method SSD: TM:2001 for testing fusel alcohols in alcoholic beverages.

  5. Reliable M2M Communication And Networking Technology Connects Wastewater Facilities
    2/28/2014

    As the world becomes increasingly connected, the integration of smart devices and tools, such as sensors, process control devices, security cameras, for example, have increased the need for well-established, secure machine-to-machine (M2M) communication and networking solutions. Many companies depend on effective communication technologies to reduce overhead costs and improve their bottom lines. By Paul Mercier, Regional Manager for OEM, Utility and Energy Markets, FreeWave Technologies, Inc.

  6. A Comparative Study Of On-Line And Laboratory TOC Analyzers For Analysis Of Municipal Wastewater
    2/7/2014

    This application note presents comparative data obtained on influent and effluent wastewater samples using laboratory and on-line TOC analyzers employing the heated sodium persulfate oxidation technique in USEPA-approved methods 415.3 and SM 5310C.

  7. Wireless Lift Station Monitoring Application Note
    11/21/2013

    Powerful Pump Monitoring for Optimal Lift Station Performance. Trimble Unity software combined with the Telog wireless, battery-powered, multi-channel recording telemetry system provides a GIS-centric cloud and mobile platform for monitoring lift station pump on/off cycles along with sump levels. Clamp-on current sensors monitor pump run on/off to one second resolution. 

  8. Wireless PRV Monitoring Application Note
    11/21/2013

    Pressure reducing valves (PRVs) are used throughout water distribution systems to reduce pipeline pressure to a predetermined set point. This decreases water loss and prevents pipe breaks.

  9. Hydrant Pressure Monitoring Application Note
    11/21/2013

    The simplicity of the compact, battery-powered Telog HPR-31 enables you to put it to work within minutes of unpacking. Once installed, the Telog HPR-31 measures water pressure at user programmable rates up to four samples per second with its internal pressure transducer. You can determine how often such data is summarized for reporting. The recorder computes any combination of minimum, average and maximum pressure measurement at each interval according to your selection of statistics and recording intervals. Recorded data may be gathered via an RS-232 connector using a handheld device or a laptop.

  10. Dissolved Oxygen Measurement In Wastewater Treatment
    11/11/2013

    A wastewater treatment plant separates solids from the liquid, and consists of two basic stages: primary treatment and secondary treatment.