Wastewater Measurement Solutions

  1. DigitalFlow™ DF868 Liquid Ultrasonic Flowmeter 1/11/2022

    The DigitalFlow DF868 is a full-featured, fixed-installation liquid flowmeter designed to meet all your flow metering and energy measurement needs. Its patented Correlation Transit-Time™ digital signal processing provides drift-free measurements in ultraclean and most “dirty” liquids. This includes fluids with gas bubbles and entrained solids that have previously required Doppler-type meters.

  2. PanaFlow ZxG Gas Meter System 1/11/2022

    The PanaFlow gas meter system consists of two models— the one-path PanaFlow Z1G and the two-path PanaFlow Z2G. Both meters offer a high-performance, yet affordable solution for a variety of gas flow applications.

  3. Best Practices In Moist And Wet Gas Flow 12/20/2021

    The Wet Gas MASSter sensor is for use in applications that have a high level of moisture or condensation present in the gas flow stream that cannot otherwise be removed.

  4. A Non-Intrusive Solution For Measuring Wastewater Flow In A WWTP's Iron Pipes 12/13/2021

    A municipal association needed to understand if wastewater was being equally distributed across two cast iron pipes within its wastewater treatment plant. Learn how clamp-on ultrasonic measurement helped successfully measure the flow.  

  5. Oxygen Content In Wastewater Digester Gas 12/13/2021

    In wastewater treatment, aerobic digestion enables plants to increase their capacity by injecting oxygen into the wastewater head space.

  6. Biogas Measurement From Wastewater To Power Plant 12/13/2021

    Stockholm water company produces biogas from their wastewater facility which feeds Scandinavian Biogas for energy production. As they need to accurately meter what they sell to the energy facility they used a project contractor firm to engineer and define the best solution for the project.

  7. North Las Vegas Puts Advanced Wastewater Treatment To Work 12/13/2021

    The North Las Vegas Water Reclamation Facility treats an average of 17 million gallons a day (MGD) of wastewater through an advanced nutrient removal process with subsequent membrane filtration. The utility’s process control enables treatment effluent exceeding typical environmental standards and allows discharge to Lake Meade, where it subsequently is withdrawn and fully treated by other facilities for drinking water distribution.

  8. Reduced Bore Electromagnetic Flowmeter 10/29/2021

    Being able to accurately measure both the quantity and rate of water passing through a water distribution system is crucial to gain an informed understanding of overall efficiency. As such, achieving a measurement that is exact as possible can have a significant impact on key areas. This includes supply planning, maintenance, resource deployment, leakage detection and the overall environment.

  9. Textile Manufacturing 10/29/2021

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.

  10. Automatic Rinse Tank Controls 10/29/2021

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored.