Wastewater Management Pumps and Valves Products

  1. Equipment Controller EC 531
    10/9/2018
    The EC 531 is an all-in-one solution for control and monitoring of sewage pumping stations with one or two pumps. It offers straightforward control and monitoring via floats or advanced control via a continuous level signal. EC 531 is also equipped with smart VFD control including PID and Best Efficiency Point (BEP), which save energy, and equipment costs.
  2. Dynajet™ Dry Polymer Blending System
    7/17/2018

    Compact, high performance dry chemical blending system utilizes blower-assisted conveyance system to transport and disperse the dry polymer prior to wetting. The wetting technology reduces plugging. The equipment is built from stainless steel to withstand extreme conditions and harsh environments.

  3. Dynablend™ Liquid Polymer Blending Systems
    7/17/2018

    Dynablend liquid polymer blending systems are proven to be the most effective and reliable hydraulic polymer activation technology. The L4 and L6 are the smallest Dynablend units and the use of a peristaltic pump makes them the most economical of the Dynablend blending system. Patented Hydroaction technology follows the science of polymer activation. Two-stage mixing with the highest energy applied first at the moment of initial wetting (MIOW) followed by a "quiescent" zone allowing for more gentle activation as polymer science dictates.

  4. Lineseal® Butterfly Valves
    4/4/2018

    Mueller® Lineseal® 350 Butterfly Valve offers 350psi operating pressure, under flow conditions of 16 ft/sec up to temperatures of 250°F and meets the design criteria for AWWA C504. This valve is available in sizes 6” – 36” for mechanical joint ends and 6” – 48” for flanged ends. This product adds to the Company’s existing line of 350psi products which includes resilient wedge gate valves and Super Centurion® fire hydrants.

  5. Singer™ Model 106 / 206 PGM-2PR-630-SM Pressure Management Valve With Integral Backup
    9/21/2017

    A simple valve package that saves both water and money, the Model 106 / 206 PGM-2PR-630-SM is an extension of the 2PR-630 pressure management valve with safety back-up.

  6. Alignment Gauge Kits Allow for Textbook Valve Cartridge Insertion
    9/1/2017

    The Hydra-Stop 4” – 8” and 10” – 12” Alignment Gauge Kits allow Hydra-Stop Insta-Valve equipment owners increased crew safety and productivity by simplifying the valve cartridge alignment process.  In three steps – align the cartridge, set the depth, and lock the cartridge in place – users can swiftly setup for final cartridge insertion.  No guessing or measuring required.  Reliable and repeatable valve insertions every time. 

  7. 4-12 Inch Insta-Valve 250 Patriot Insertion Valve
    9/1/2017

    The Insta-Valve 250 Patriot insertion valve provides an immediate control point in distribution systems, without using a system-wide shut down.  Installed under pressure, up to 250 psi, the Insta-Valve 250 Patriot increases operator safety, limits environmental impact, and saves up to 100% of the costs related to system shutdown.

  8. Hydra-Q.I.K – Quick Install Kit
    9/1/2017

    Designed exclusively for Hydra-Stop Insta-Valve Installation Equipment.

  9. Hydra-Core Pipe Wall Sampling Kit
    9/1/2017

    Confirm inner pipe diameter in minutes.

  10. HSF 250 Patriot Series Line Stop Fitting
    9/1/2017

    The re-designed 4-12 inch Hydra-Stop HSF 250 Patriot Line Stop fitting is a step forward in line stopping technology. Installed at pressures up to 250 psi, the HSF 250 line stop fitting delivers benefits, which save time, increase safety, and eliminates up to 100% of the costs associated with system shutdowns.