Wastewater Management Pumps and Valves Products

  1. Double-See Double Containment
    10/27/2016

    This vinyl double containment piping system is fast and easy to install, and is available with a complete selection of pipe, fittings, and valves. Additionally, an innovative "valve-in-valve" design is offered which allows full containment pressure rating. Double-See™ is available in PVC and CPVC; either material may be primary or secondary (PVC x PVC, CPVC x PVC, CPVC x CPVC) with Clear PVC always being an option for the containment pipe. System size options range from 1/2" x 2" to 6" x 10", meeting virtually any application requirement. Installation versatility allows simultaneous joining throughout a system or in combination with patented closure couplings which enable practical compliance with the ASME B31.3  requirement for visual inspection of all primary joint connections during the pressure test before closing the secondary piping joint.

  2. 9950 Dual Channel Transmitter
    10/26/2016

    The 9950 Transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® Signal Converter.

  3. 4"-12" Resilient Wedge Gate Valves with ALPHA™ Restrained Joint Ends
    10/14/2016

    The AMERICAN Series 2500 Ductile Iron Resilient Wedge Gate Valve is available with ALPHA ends in sizes 4” -12”. The valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems.

  4. Pratt® Metal Seated Solid Wedge Gate Valve
    8/12/2016

    Designed and manufactured for use in wastewater and sewage applications, the Pratt® Metal Seated Solid Wedge Gate Valve is available in both non-rising stem and OS&Y designs. Available in sizes 3”-96”, the valve meets AWWA C500, ANSI and ASTM standards. All valves 16” and larger are designed with bronze body and wedge guides. The valve is available with hand wheels, operating nuts and integrally cast mounting pads for gears or electric actuators. All valves are coated internally and externally with liquid epoxy conforming to AWWA C500.

  5. Compit Pressure Sewer System
    1/11/2016

    Does “one size fits all” fit your design requirements? With more than 300,000 grinder pumps in successful service since the early 1980s, Flygt understands the importance of pump selection in the overall performance of your pressure sewer system. That’s why Flygt Compit Pressure Sewer Systems offer two proven grinder pump technologies to better meet your specific needs — progressive cavity or centrifugal hydraulics.

  6. Gorman-Rupp’s 6500 Series Standard Horizontal End Suction Centrifugal Pumps
    12/14/2015

    6500 Series end suction centrifugal pumps are based on the proven technology of Gorman-Rupp's Prime Aire and Prime Aire Plus priming-assisted pump models. The 6500 Series was designed to extend Gorman-Rupp's end suction centrifugal pump offering and to better serve applications where a suction lift is not required. A double volute mitigates shaft breakage and extends the life of the mechanical seals, wear rings and bearings, all while maintaining hydraulic efficiency, while a side access port allows for easy access to pump interior for inspection and clean out while the pusher bolt capability assists in the removal of the suction flange.

  7. Flygt Dri-Prime Pumps — The Benchmark For Reliability
    12/2/2015

    When there’s fluid to move — and downtime is not an option — you want pumps you can trust. Whether it’s a question of water, wastewater, or industrial fluids, Flygt has earned a worldwide reputation for reliability.

  8. Flygt 4320 Mixers
    9/16/2015

    Flygt, the industry leader in municipal wastewater mixing, is proud to raise the standard in high efficiency, low-speed submersible mixers. Flygt 4320’s revolutionary design couples a high efficiency mixer and state-of-the-art motor efficiency, with an integrated variable frequency drive (VFD). The result is a submersible mixer that delivers superior mixing with adjustability and simplicity, for unsurpassed energy savings.

  9. Flygt Seals
    8/10/2015

    The reliability of a submersible product will never be better than the reliability of its sealing system. Unlike dry-installed equipment, any fluid leaking through the seals will accumulate in the pump or mixer and cannot be drained during operation. To achieve long service intervals and high reliability, exceptional demands are made on the sealing system for submersibles.

  10. Flygt SmartRun®
    6/26/2015

    Introducing SmartRun, a pump controller solution for pump stations with up to three alternating pumps. An integral part of the Flygt Experior® concept, this pump-control unit lets your pump take care of itself, freeing the pump station from debris, setting the optimal speed for energy efficiency and cost savings, as well as communicating with external monitoring equipment for peace of mind. SmartRun handles pump cleaning, pipe cleaning, sump cleaning, soft starts and stops; giving you to a new level of reliability and efficiency in an easy-to-install solution. The integrated intelligence and variable speed control mean it’s the perfect match for Flygt N-pumps – a combination that can potentially reach energy savings up to 50%