Wastewater Management Pumps and Valves Products

  1. 16" IVP 250 Insertion Valve
    9/1/2017

    The 16” IVP 250 from Hydra-Stop is the next generation of permanent, insertable gate valves offering increased strength, improved performance, and simplified installation and operation.

  2. Hydra-Stop 10 and 12 inch Insta-Valve 250 Insertion Valves
    9/1/2017

    The new 10 and 12 inch Insta-Valve 250 Patriot insertion valves from Hydra-Stop incorporate integrated design features which deliver superior performance and ease of installation.

  3. H-306HP Fabricated Steel Tapping Sleeve
    6/12/2017

    Mueller Co. recently announced a new H-306HP fabricated steel tapping sleeve. Designed for hot tapping ductile iron pipe and thick-wall C900 plastic pipe, the H-306HP is made from A36 fabricated steel and meets the requirements of AWWA C223. It features an integral bolt flange, Rilsan nylon coating, working pressures up to 300psi, and is available sizes from 4”-16”. The H-306HP is an economical tapping sleeve ideally suited for use with Mueller® CL-12, C1-36, and Mega-Lite drilling machines in less corrosive soil environments.

  4. STAR ONE™ S&L Non-Clog Pump
    4/5/2017

    The new S&L STAR ONE™ Non-Clog Pump raises the bar on pump efficiency —anywhere from 3-5 percent higher than previous S&L pumps — paving the way for significant energy cost savings.

  5. Pneumatic Dynamic Lifter Relief Valve
    12/13/2016

    The Pneumatic Dynamic Lifter is a very responsive compact wastewater relief valve that can handle high pressures and uses a compressed air cylinder to hold the valve closed. This chamber is fitted with a relief pilot that is normally closed as long as the line pressure is lower than the set point. If pressure rises above the set point, the relief pilot opens, causing the air in the cylinder to vent, which in turn opens the valve. The valve closes drip tight when pressure falls below the set point.

  6. EA25-250 Electric Actuators
    10/27/2016

    The Electric Actuators Type EA25, EA45, EA120 and EA250 offer several beneficial features and covers a wide torque range.  With the variety of available options, this family of actuators is ideal for nearly all applications.

  7. 4150 Turbidimeter
    10/27/2016

    The Signet 4150 Turbidimeter provides accurate and reliable EPA-compliant water quality monitoring for municipal and industrial applications.

  8. 4632 Chlorine Dioxide Analyzer System
    10/27/2016

    The Signet 4632 Chlorine Dioxide Analyzer System is an integrated all-in-one system designed to measure Chlorine dioxide residual up to 2 ppm/mg/l.

  9. ecoFIT Metric Industrial HDPE
    10/27/2016

    ecoFIT PE100 Industrial Polyethylene ushers in a new generation piping system designed specifically for broad-based applications. The dynamic combination of specifiable pipe, fittings, valves, and advanced fusion technologies integrates well into the industrial process industry.

  10. Double-See Double Containment
    10/27/2016

    This vinyl double containment piping system is fast and easy to install, and is available with a complete selection of pipe, fittings, and valves. Additionally, an innovative "valve-in-valve" design is offered which allows full containment pressure rating. Double-See™ is available in PVC and CPVC; either material may be primary or secondary (PVC x PVC, CPVC x PVC, CPVC x CPVC) with Clear PVC always being an option for the containment pipe. System size options range from 1/2" x 2" to 6" x 10", meeting virtually any application requirement. Installation versatility allows simultaneous joining throughout a system or in combination with patented closure couplings which enable practical compliance with the ASME B31.3  requirement for visual inspection of all primary joint connections during the pressure test before closing the secondary piping joint.