Ozone treatment for water and wastewater has been utilized successfully for several decades and continues to be a viable disinfection solution for both municipal and industrial plants, worldwide.
The GDT™ Process starts with the creation of ozone from an Ozone Generator. The ozone is then drawn into a Mazzei®Venturi Injector which provides dynamic mixing (a Back Pressure Control Valve adjusts injector outlet pressure optimizing ozone mass transfer in the system). Then mixing and contacting is enhanced in a Flash Reactor™. From there the two-phase flow travels to the Degas Separator (DS) & Relief Valve for additional mixing and entrained gas removal. And finally, the MTM Mixing Nozzles force dissolved ozone flow into the untreated water in the pipeline or basin for thorough mixing.
IMS Wet Emergency Chlorine Scrubber Systems are designed to contain and treat accidental releases of chlorine gas. Systems are offered to treat up to 3 tons of chlorine gas. The IMS wet emergency chlorine scrubber is a three-stage single-pass chemical absorption system with very high efficiency horizontal packed bed sections. An induced draft fan pulls the chlorine gas through the scrubber, where it contacts a recirculation caustic solution. The scrubber system is factory pre-assembled, complete with induced draft fan, recirculation pump, instrumentation and controls.
VLR® Systems from Evoqua utilize a vertical loop based design with looped reactors in series that allows DO stratification. As such, it is suited for simultaneous nitrification/denitrification; biological phosphorus removal and storm water treatment..
At De Nora, we are strongly committed to providing aftersales and service support for our entire equipmen portfolio and similar competitive equipment.
In the modern world of wastewater treatment, control of odors has moved from an afterthought to a primary design consideration for most collection and treatment facilities. As communities and other development increases in the areas surrounding these facilities, the need for odor control systems becomes more important.
VigorOx® WWT II is a strong wastewater disinfectant for use in wastewater treatment that can replace chlorine or improve the performance of a UV system. VigorOx WWT II, a peracetic acid (PAA)-based formulation, is an equilibrium mixture of acetic acid (vinegar), hydrogen peroxide and water.
The JCS Industries Model 4200EC Gas Vacuum Chemical Feeder mixes and feeds gaseous chemicals commonly used for water and wastewater disinfection accurately, reliably and safely. The system is comprised of a vacuum injector to safely introduce the gas into the feed-water stream, a reversing servo motor coupled with a V-notch valve to regulate the chemical flow rate, and a control module for complete electronic control and communications.
With 1,200 installations worldwide, De Nora Ozone offers a wide range of ozone systems, from small compact units to turnkey plants. Ozone is used for the treatment of municipal drinking water and wastewater; micropollutants; industrial wastewater and process water; advanced oxidation; pools and spas; and biological sludge reduction. Using the strongest natural oxidants, on-site ozone generation does not create a residual biological sub-product, offers quick reaction time, and requires no chemical compounds. De Nora Ozone systems maximize ozone concentration while minimizing energy requirements, working closely with the customer to a provide a tailor-made solution for individual needs. De Nora Ozone has the expertise to ensure you get the most effective technical solution through pilot plants, testing and scale units.
|
|
|
|
|
|
|
|
|