Wastewater Disinfection PRODUCTS

  1. 3-Way Valve 4/1/2015

    The 3-Way Valve is available in 4”, 6” and 8” sizes and is available as a stand-alone valve or as part of a Vaughan submersible or vertical wet-well Chopper Pump. The valve is a non-plug design using a rotatable CD-4MCu valve disc to allow discharge out of either of the top ports.

  2. NeoTech CU-4 X™ 4/16/2014

    The NeoTech CU4-X™ UV Water Treatment Control Interface is a remote and compact master controller capable of managing up to four NeoTech ultraviolet water treatment chambers independently and simultaneously.

  3. Turbo Mixer 4/1/2015

    Vaughan’s Turbo Mixer is a propeller mixer mounted vertically inside an 18” elbow. This mixer has replaced many submersible propeller mixers which have experienced motor or gearbox failure due to fluid inleakage. 

  4. Pipeline Flash Reactors for Mixing & Contacting 5/19/2017

    Pipeline Flash Reactors (PFRs or spool pieces) utilize high velocity mixing to transfer ozone or oxygen-enriched sidestreams into bulk water flow, all within a compact footprint. With a PFR, ozone or oxygen mass transfer occurs in the pipeline within seconds, eliminating the need for additional tanks or basins.

  5. TrojanUV3000Plus — Wastewater Disinfection System 11/6/2006

    The TrojanUV3000Plus® is one of the reasons why UV treatment is now a favored technology in wastewater treatment. Often touted as a flagship UV system, it has demonstrated effective and reliable performance around the world. In fact, over 2,000 municipalities rely on it to disinfect over 30 billion gallons of wastewater every day.

  6. MagnaPak™ DOC Removal Systems 10/5/2005

    The MagnaPak™ System provides a simple, cost-effective solution for meeting EPA disinfection by-product standards by utilizing the MIEX® ion exchange resin to remove dissolved organic carbon – a precursor to DBP formation – from the raw water supply

  7. Capital Controls® CHLOR-A-VAC® Series 1520 Chemical Industion Unit 10/15/2015

    The Series 1520 CHLOR-A-VAC® affords high efficiency addition and mixing of gases and liquid chemicals resulting in substantial chemical cost savings.

  8. Foambuster 4/1/2015

    The patented Foambuster uses the same glass-lined ductile iron nozzles as Rotamix but also uses a stainless steel splashplate located below the nozzle to deflect the nozzle discharge and create a broad spray of sludge, which wets and breaks up foam forming on the surface of the digester. Digester sludge is pumped through the Foambuster either by the Rotamix Chopper Pump or by a separate Chopper Pump. When the Foambuster is used in conjunction with a tank mixing system, which produces a rotational mixing pattern in the tank, only one spray nozzle will be required for effective foam control.

  9. Constant Chlor® Rapid Rate Feeder Fast-Acting CSO Disinfection System 1/11/2021

    The Constant Chlor® Rapid Rate Feeder is a highly-customizable large scale CSO disinfection system for wastewater applications. CSOs may occur after a large rainfall or melt, causing wastewater to exceed the capacity of the system. When used with Constant Chlor® Plus Briquettes, the Rapid Rate feeder is able to quickly disinfect the large volume of wastewater during a CSO event.

  10. Aqua ElectrOzone Ozone Generation System 7/13/2016

    Ozone treatment for water and wastewater has been utilized successfully for several decades and continues to be a viable disinfection solution for both municipal and industrial plants, worldwide.