Wastewater Disinfection Solutions

  1. SedVac Sediment Removal System 4/28/2015

    SedVac’s unique design funnels the sludge and scrapes the floor, resulting in consistent solids removal of 3 percent concentration while wasting less water than traditional pipe systems.

  2. The VLR® System for TrueSND™ Biological Treatment 11/22/2014

    VLR® Systems from Evoqua utilize a vertical loop based design with looped reactors in series that allows DO stratification. As such, it is suited for simultaneous nitrification/denitrification; biological phosphorus removal and storm water treatment..

  3. PhotonMaster™ Luminometer 6/1/2016

    Reliable data starts with a reliable device. Generate your data from the PhotonMaster, a luminometer that is sensitive enough for the cleanest sample, robust enough for the toughest testing environment, and cost-friendly for any budget.

  4. Disinfection Systems 3/1/2023

    Discover the disinfection solutions that Evoqua has been providing for more than 100 years.

  5. RapiSand™ Ballasted Flocculation System 7/23/2015

    The WesTech RapiSand™ ballasted flocculation system is a high-rate clarification process combining rapid mixing and multi-stage flocculation, followed by sedimentation. RapiSand™ sedimentation is extremely fast and can be applied in a wide variety of suspended solids removal applications.

  6. ETS-UV™ For Wastewater Treatment 2/4/2014

    Many municipalities had adopted ultraviolet (UV) disinfection treatment over chemical based disinfection.  UV disinfection is efficient, low cost and an environmentally friendly way to disinfect water.  The process is safer for operators and the community; UV is a chemical free process that adds nothing to the water but light.  Read more about how the UV disinfection works.  Unlike chlorine, UV disinfection is able to inactivate pathogens such as Giardia and Cryptosporidium.  Discharged wastewater with these pathogens becomes dangerous drinking and recreational water for downstream communities.    

  7. Model 420-T Ton Mounted Vacuum Regulator 5/16/2016

    The JCS Industries Model 420-T Ton Mounted Vacuum Regulator is designed for years of safe and reliable service.

  8. New! Fully Assembled Lightweight And Compact Complete Metering System 1/23/2025

    Looking for a Skid Mounted Complete Metering System, but your equipment room is short on space? The New CHEM-FEED CFCS is engineered for small spaces. It features a compact design and small footprint. The skid is constructed of tough, lightweight chemical and UV-resistant polyethylene, and it ships fully assembled with all necessary components for easy install and fast startup.  Wall or Shelf Mount. One or Two Pump Models.

  9. Foambuster 4/1/2015

    The patented Foambuster uses the same glass-lined ductile iron nozzles as Rotamix but also uses a stainless steel splashplate located below the nozzle to deflect the nozzle discharge and create a broad spray of sludge, which wets and breaks up foam forming on the surface of the digester. Digester sludge is pumped through the Foambuster either by the Rotamix Chopper Pump or by a separate Chopper Pump. When the Foambuster is used in conjunction with a tank mixing system, which produces a rotational mixing pattern in the tank, only one spray nozzle will be required for effective foam control.

  10. Small Tank Mixing 4/2/2015

    Small tank mixing is a lower cost, simplified Rotamix system, using a Chopper Pump and external-mount nozzle assemblies. The external-mount nozzles are sandwiched between 6" ANSI flanges and provide fixed discharge angles off the tank wall.