Wastewater Disinfection Solutions

  1. NeoTech D338™ 4/16/2014

    The NeoTech D338™ is specially designed to disinfect water and is an essential component in advanced oxidation processes.

  2. UV Technology Offers Solution For Emerging Water Crisis 2/19/2014

    Many are turning to UV as an effective barrier to enable the reuse of wastewater, for indirect reuse, and aquifer recharge.

  3. Foambuster 4/1/2015

    The patented Foambuster uses the same glass-lined ductile iron nozzles as Rotamix but also uses a stainless steel splashplate located below the nozzle to deflect the nozzle discharge and create a broad spray of sludge, which wets and breaks up foam forming on the surface of the digester. Digester sludge is pumped through the Foambuster either by the Rotamix Chopper Pump or by a separate Chopper Pump. When the Foambuster is used in conjunction with a tank mixing system, which produces a rotational mixing pattern in the tank, only one spray nozzle will be required for effective foam control.

  4. GDT Mixing & Contacting Systems 5/19/2017

    The GDT Process starts with the creation of ozone from an Ozone Generator. The ozone is then drawn into a Mazzei®Venturi Injector which provides dynamic mixing (a Back Pressure Control Valve adjusts injector outlet pressure optimizing ozone mass transfer in the system). Then mixing and contacting is enhanced in a Flash Reactor.

  5. EST Dry Emergency Gas Scrubber Systems 10/6/2015

    De Nora Water Technologies’ EST dry emergency scrubbers are engineered to meet national codes for the mitigation of hazardous gas releases from pressurized 150-pound cylinders and one-ton containers of chlorine, sulfur dioxide, ammonia and other toxic gases.

  6. Wallace & Tiernan® Analyzers and Controllers 12/16/2014

    Wallace & Tiernan MFC analyzer/controller offers a broad combination of drinking water analysis and disinfection/chemical control in a single unit.The MFC analyzer/controller offers an easy, software selectable range of control modes from flow proportional, residual control only, compound loop and set point trim enabling precise control of a chlorinator or metering pump to maintain the desired level of disinfection and water quality.

  7. ClorTec® DN On-Site Sodium Hypochlorite Generators 10/6/2015

    The latest generation of brine electrochlorination technology, the ClorTec DN range, offers simple operation and maintenance as well as unrivalled safety advantages.

  8. MARINER OMNIPURE® Series M55 Marine Sewage System 10/5/2015

    The MARINER OMNIPURE® Series M55 marine sewage treatment units offer a unique approach to wastewater treatment on smaller vessel, workboat and yacht applications. MARINER OMNIPURE Series M55 features a bulkhead mounting arrangement — a first of its kind — that provides safe and effective treatment of the wastewaters on board your vessel. The system results in discharge effluent quality well within the MEPC.159(55) requirements.

  9. Capital Controls® CHLOR-A-VAC® Series 1420 Chemical Industion Unit 10/15/2015

    The Series 1420 CHLOR-A-VAC® affords high efficiency addition and mixing of gases and liquid chemicals resulting in substantial chemical cost savings.

  10. Dual Diaphragm Chemical Feed For Precise Chem Dosing With No Vapor Lock 10/30/2023

    While dosing challenging chemicals can be tricky for operators, there are a range of technologies that will help mitigate problems and ensure smooth, accurate, and dependable chemical dosing.