Hot Products
-
M21 Transmitter
1/11/2017
The Millennium II (M21) single channel universal transmitters have been engineered from the ground-up to include the innovative features that managers and operators in the field demand, while providing rock solid day-to-day operation, even in the most extreme conditions. The Millennium II redefines what you expect from a fixed gas detection solution.
-
CX1100 In-Situ Oxygen Analyzer
4/6/2018
The Rosemount CX1100 In-Situ Oxygen Analyzer provides measurement of oxygen in clean-burning applications. Get accurate oxygen measurements to optimize combustion reactions, reduce energy costs and meet environmental regulations. All welded construction and no reference gas requirement reduces installation and maintenance costs.
-
CT5100 Continuous Gas Analyzer
5/26/2016
Rosemount CT5100 continuous gas analyzer from Emerson is the world’s only hybrid analyzer to combine Tunable Diode Laser (TDL) and Quantum Cascade Laser (QCL) measurement technologies for process gas analysis and emissions monitoring. The CT5100 is available in two variants: a certified system, housed in a purged and pressurized enclosure for hazardous area installations; and a non-certified system for use in nonhazardous areas. Both can house up to six lasers to measure up to 12 critical component gases and potential pollutants simultaneously within a single system - meeting local, state, national, and international regulatory requirements. The CT5100 is a unique combination of advanced technology, high reliability, and rugged design. Its "laser chirp" technique expands gas analysis in both the near- and mid-infrared range, enhancing process insight, improving overall gas analysis sensitivity and selectivity, removing cross interference, and reducing response time. The laser chirp technique produces sharp, well-defined peaks from high resolution spectroscopy that enable specificity of identified components with minimum interference and without filtration, reference cells, or chemometric manipulations.
-
56 Advanced Dual-Input Analyzer
8/16/2011
The Smart Way to pH
56 Advanced Input Analyzer - Click here for an informative article on Smart pH! -
Disinfection: TCL Total Chlorine Analyzer
8/30/2005
Total chlorine measurement is essential in the control of chlorine in water before its return to the environment in a wide range of industrial applications including desalination. It also provides accurate reporting to the EPA about that control. To meet EPA requirements, the instrument must be reliable for long periods of time and monitor down to 500 ppb. The Rosemount Total Chlorine Measurement system from Emerson meets and exceeds all requirements while saving money through the use of low-cost reagents.
-
Instrumentation: Analysis: 1056 Dual-Input Intelligent Analyzer
1/24/2007
The 1056 Single- or Dual-Input Analyzer is described as a "cost-effective, workhorse instrument" appropriate for the widest range of both OEM and end user liquid analysis applications. The 1056 allows the user to choose from any combination of measurements: pH/ORP/ISE, resistivity/conductivity, percent concentration, chlorine (free, total, monochloramine, pH independent free chlorine), oxygen, ozone and temperature.
-
Dissolved Oxygen: 499ADO
8/30/2005
The 499ADO sensor is intended for the continuous determination of dissolved oxygen between 0-20 ppm. The primary application is aeration basins in municipal and industrial wastewater treatment plants
-
Heated Self Compensating Duct Probe
12/29/2014
The heated Self Compensating Duct Probe (SCDP-H) has been designed for use in temperatures as low as -40 °C. When used with a GDA aspirator, it provides a complete duct sampling system capable of operating in hazardous areas. The SCDP-H allows simple, trouble free, representative sampling of duct environments.
-
Disinfection: MCL
8/30/2005
The MCL monochloramine system is intended for the determination of monochloramine in fresh water
-
FCL Free Chlorine Measuring System
5/16/2011
The Model FCL is a complete system that measures free chlorine in fresh water. It includes a transmitter (choice of Model 56 or Model 1056), a 499ACL-01 free chlorine sensor, a pH sensor (if required), and a constant head flow controller. The transmitter and flow controller are mounted on a back plate, and quick disconnect Variopol sensor cables are pre-wired to the transmitter, making installation and startup fast and easy.