Hot Products
-
Desalination Of Sea Water
4/4/2006
Desalination is the name given to processes that remove salt from water
-
Performance Target Verification Kit PTV-01
3/16/2017
The PTV-01 provides an accurate method to test both functionality and performance of the Incus ultrasonic gas detectors.
-
Ultrasonic Gas Leak Mapping Services Incus Ultrasonic Gas Leak Detector
3/16/2017
Ultrasonic gas leak mapping is a service offered to measure and record the background ultrasound of process plant under normal operation. The information gathered along with gas pressure, gas temperature, and gas type is used to assess the likely detection radius of the Incus for client specified gas leak rates.
-
Millennium APM And Oil Mist Detector
12/29/2014
The Millennium APM is the only infrared optical monitor that is certified for use in hazardous areas for constant, reliable monitoring of ambient air for products of combustion such as smoke, oil mist, carbon, dust, and ash.
-
ST3 XChem Toxic Gas Sensors
12/29/2014
The ST3 XChem series of SMART electrochemical toxic gas sensors provide high specificity, fast response, and long life. All ST3 sensors are part of the universal Millennium II Gas Detection platform and are compatible with the M21, M22, and M2B transmitters. Our latest design employs our “SimpleClick” sensor element replacement plus improved overall performance and extremely low power consumption.
-
Fixed Gas Detector Calibration Kits
12/29/2014
All gas sensors must be calibrated to on-site environmental conditions once installation is complete. Net Safety Monitoring gas sensors are calibrated to factory conditions before shipment to verify operation but accurate response to gas must be again be verified prior to using the device. Regular checks and calibrations are also essential to ensure that the detectors are ready to respond at all times. Net Safety Calibration Kits do not come with gas cylinders, they must be ordered separately.
-
CT5100 Continuous Gas Analyzer
5/26/2016
Rosemount CT5100 continuous gas analyzer from Emerson is the world’s only hybrid analyzer to combine Tunable Diode Laser (TDL) and Quantum Cascade Laser (QCL) measurement technologies for process gas analysis and emissions monitoring. The CT5100 is available in two variants: a certified system, housed in a purged and pressurized enclosure for hazardous area installations; and a non-certified system for use in nonhazardous areas. Both can house up to six lasers to measure up to 12 critical component gases and potential pollutants simultaneously within a single system - meeting local, state, national, and international regulatory requirements. The CT5100 is a unique combination of advanced technology, high reliability, and rugged design. Its "laser chirp" technique expands gas analysis in both the near- and mid-infrared range, enhancing process insight, improving overall gas analysis sensitivity and selectivity, removing cross interference, and reducing response time. The laser chirp technique produces sharp, well-defined peaks from high resolution spectroscopy that enable specificity of identified components with minimum interference and without filtration, reference cells, or chemometric manipulations.
-
CX1100 In-Situ Oxygen Analyzer
4/6/2018
The Rosemount CX1100 In-Situ Oxygen Analyzer provides measurement of oxygen in clean-burning applications. Get accurate oxygen measurements to optimize combustion reactions, reduce energy costs and meet environmental regulations. All welded construction and no reference gas requirement reduces installation and maintenance costs.
-
Millennium ST Toxic Gas Detector
12/29/2014
Net Safety's Millennium ST Series of toxic gas detectors utilize electrochemical sensing technology to continuously monitor your site for a wide range of toxic gas types. The Millennium ST is fast , accurate, and requires only periodic calibration and maintenance with a typical sensor life of 3–5 years.
-
SafeGuard Alarm Controller
12/29/2014
The Net Safety SafeGuard Alarm Controller is designed as a cost-effective mini-system controller alternative to expensive PLC systems. The SafeGuard comes standard with a centralized, easy-to-read LCD providing simultaneous status on 16 channel inputs as well as several expansion options including Mimic Display capabilities and HMI software packages. The SafeGuard can be equipped for any application, indoors or out, with your choice of a basic wallmount, a weather-proof fiberglass enclosure or rack panel mounting.