Hot Products
-
Disinfection: MCL
8/30/2005
The MCL monochloramine system is intended for the determination of monochloramine in fresh water
-
ST3 XChem Toxic Gas Sensors
12/29/2014
The ST3 XChem series of SMART electrochemical toxic gas sensors provide high specificity, fast response, and long life. All ST3 sensors are part of the universal Millennium II Gas Detection platform and are compatible with the M21, M22, and M2B transmitters. Our latest design employs our “SimpleClick” sensor element replacement plus improved overall performance and extremely low power consumption.
-
pH: 3500 PERpH-X High Performance pH Sensor
5/22/2008
The 3500 and 3500VP are the foundation of the Rosemount PERpH-X™ high performance pH sensor offering. The 3500 sensors incorporate several design innovations that prolong the life of the sensor in difficult applications
-
Fixed Gas Detector Calibration Kits
12/29/2014
All gas sensors must be calibrated to on-site environmental conditions once installation is complete. Net Safety Monitoring gas sensors are calibrated to factory conditions before shipment to verify operation but accurate response to gas must be again be verified prior to using the device. Regular checks and calibrations are also essential to ensure that the detectors are ready to respond at all times. Net Safety Calibration Kits do not come with gas cylinders, they must be ordered separately.
-
Heated Self Compensating Duct Probe
12/29/2014
The heated Self Compensating Duct Probe (SCDP-H) has been designed for use in temperatures as low as -40 °C. When used with a GDA aspirator, it provides a complete duct sampling system capable of operating in hazardous areas. The SCDP-H allows simple, trouble free, representative sampling of duct environments.
-
Millennium ST Toxic Gas Detector
12/29/2014
Net Safety's Millennium ST Series of toxic gas detectors utilize electrochemical sensing technology to continuously monitor your site for a wide range of toxic gas types. The Millennium ST is fast , accurate, and requires only periodic calibration and maintenance with a typical sensor life of 3–5 years.
-
Millennium APM And Oil Mist Detector
12/29/2014
The Millennium APM is the only infrared optical monitor that is certified for use in hazardous areas for constant, reliable monitoring of ambient air for products of combustion such as smoke, oil mist, carbon, dust, and ash.
-
Flame Detectors
8/3/2016
Optical Flame Detectors designed to perform in the harshest environmental conditions and connect directly to alarm or automatic fire extinguishing systems.
-
Millennium SC1100 Catalytic Bead LEL Gas Detector
12/28/2014
The SC1100 Catalytic Bead gas detector continuously monitors your site for the presence of combustible gases. Net Safety's proprietary SensorGuard feature protects sensors from damage caused by extended exposure to high concentrations of combustible gas.
-
Water Quality Monitoring: Multiparameter Water Quality System
10/12/2005
The Multiparameter Water Quality System provides one of the most efficient solutions for the continuous on-line measurement of pH, ORP, conductivity, temperature, free chlorine, total chlorine, monochloramine, and oxygen