Pump Station Monitoring Solutions

  1. Schreiber Screw Pump 5/6/2021

    Schreiber’s screw pumps utilize a unique single row, self-aligning, combination radial / thrust lower, spherical roller support bearing with a minimum L-10 life of 100,000 hours. The lower bearing lubrication system is simple and reliable by requiring only a transparent oil reservoir and feed tube to provide oil by gravity, without elaborate pressurized grease systems and their inherent operational concerns. A simple pillow block or flanged bearing provides radial support at the upper shaft.

    Learn more about screw pumps.

  2. Sewage Lift Station Pumping System 6/20/2019

    Lack of sufficient straight pipe run made it impossible to successfully apply the preferred magnetic flow meter (magmeter) to accurately measure the flow of raw sewage.

  3. Channel Monster Flex 4/15/2019

    The patent pending Channel Monster FLEX consists of a FLEX Grinder and a Solids Diverter with perforated screen connected by a FLEX Frame. The Channel Monster FLEX continues the Channel Monster legacy of high flow capacity while capturing and shredding rags, rocks, wood, and other solids into small pieces to pass harmlessly through pumps, pipes, and process equipment.

  4. X-PELLER® Non-Clog Pump Impeller 11/5/2018

    The X-PELLER® was specifically designed for high volumes of trash pumping applications and low flow conditions in 4" (75-800 GPM), 6" (75-1,000 GPM) and 8" (300-1,700 GPM) vacuum primed and flooded suction Smith & Loveless pumps.

  5. Equipment Controller EC 531 10/9/2018

    The EC 531 is an all-in-one solution for control and monitoring of sewage pumping stations with one or two pumps. It offers straightforward control and monitoring via floats or advanced control via a continuous level signal. EC 531 is also equipped with smart VFD control including PID and Best Efficiency Point (BEP), which save energy, and equipment costs.

  6. Submersible Wastewater Pump Type ABS AS 8/3/2018

    The AS range are robust, reliable submersible pumps from 1 to 3 kW for pumping wastewater and sewage from buildings and sites. The pumps have water pressure-tight, encapsulated, fully flood-proof motors in standard and explosion-proof versions.

  7. Submersible Wastewater Pump Type ABS Scavenger EJ 8/3/2018

    Designed for pumping raw water, wastewater, and sewage from buildings and sites in both domestic and commercial areas. Free solids passage up to 65 mm. The pump and motor section form a pressure-tight encapsulated unit which is fully flood-proof.

  8. Submersible Propeller Pump Type ABS VUPX 8/1/2018

    The submersible propeller pump type ABS VUPX, equipped with a Premium Efficiency IE3 motor and engineered propellers is the most efficient axial-flow vertical column pump on the market.

  9. Submersible Sewage Pump Type ABS XFP 8/1/2018

    The highly efficient submersible sewage pump type ABS XFP range is designed for use in terminal and engineered pumping stations. With Premium Efficiency IE3 motors as standard and a versatile range of Contrablock plus impellers, the pumps vouch for highly efficient and reliable operation.

  10. Submersible Recirculation Pump Type ABS XRCP 8/1/2018

    The XRCP is Sulzer’s premium range of recirculation pumps, specifically designed for efficient pumping and recirculation of activated sludge in the denitrification/nitrification process of a wastewater treatment plants. These compact and easy-to-handle pumps are equipped with Premium Efficiency motors and designed for large flows and low heads. Compared to conventional axial flow pumps, recirculation pumps do not require expensive structures in the tank, such as inflow chamber and a large rising pipe.