Drinking Water Solutions

51. Ozone Destruction System 4/16/2014

    NeoTech Aqua Solutions’ line of 254 nm wavelength low-pressure lamps effectively destroys residual ozone and a member of our technical staff will professionally size your UV system. 

52. PFAS Reference Materials 8/17/2021

    Per- and polyfluoroalkyl substances (PFAS) are man-made chemicals that have been used in industry and consumer products worldwide since the 1950s.
    PFAS can be found in:

53. Cloth Media Filtration Removes Coal Ash And Coal Fines At Power Plants 1/15/2019

    Coal-fired power plants generate coal fines and coal ash from a number of sources, including coal combustion residuals (CCR), particularly fly and bottom ash from coal furnaces, and coal pile runoff during rain events. In support of an industry-wide effort to reduce, improve, and remove coal ash ponds, a variety of technologies have been tested and employed. Read the full application note to learn more.

54. MECTAN® Induced Vortex Grit Chamber 11/21/2011

    Grit is a source of problems in wastewater treatment facilities, which causes wear and tear on mechanical equipment, decreases the effective treatment volume in basins, causes pipe blockages and generally increases operating costs.

55. Application Note: Desalination Plants: YSI Instruments Monitor Flow & Water Quality At Multiple Stages 2/3/2011
    Desalination is the process of removing salt from sea water or brackish river or groundwater to make potable water. By YSI
56. Ion Exchange Resins Reduce Pollution From Refineries 12/23/2013

    A single operational oil and gas refinery produces millions of gallons of contaminated wastewater a year, leading to environmental pollution concerns. Ion exchange resins are a metal- and ion-removal solution to help clean this wastewater for plant reuse or safe disposal. This application guide explains how resins can be used to demineralize refinery water in process, boiler, and cooling water applications.

57. Water Reuse: Solutions For Sustainability, Efficiency, And Resilient Water Systems 10/28/2025

    What is water reuse?

    Water reuse is the process of treating and reclaiming water from various sources for practical purposes, including groundwater recharge, industrial applications, wetland restoration, agricultural irrigation, public access area uses, as well as drinking water applications. By reusing water, communities can reduce dependence on traditional water supplies, avoid costly imported water from 3rd party providers, and improve resilience in water systems. Thanks to progress in water treatment technology, along with economic and regulatory incentives, water recycling has become a cost-effective and sustainable solution to meet the growing demand for highly treated water and overcome supply shortages during droughts.

    There are three primary types of water reuse: Indirect Potable Reuse (IPR), Direct Potable Reuse (DPR), and Non-Potable. In IPR reuse systems, advanced treated water is either injected into an environmental buffer (groundwater, river, or reservoir) before being extracted again for use, whereas DPR is directly blended into the drinking water treatment plant or distribution system. Non-potable water is not intended for human consumption and can be used for irrigation, industrial processes, laundry, or toilet flushing.

    Advanced treatment technologies, such as membrane filtration, reverse osmosis, ultraviolet disinfection, ozonation, and advanced oxidation processes (AOP), play a crucial role in ensuring the quality and safety of reclaimed water.

    Why reuse water? 

    As water scarcity continues to rise, water reuse is an essential strategy for creating a more sustainable future. The use of recycled water reduces the demand for freshwater sources, which are becoming increasingly scarce due to population growth, climate change, and other factors.

    Here are some key benefits of water reuse:

    • Safeguard quality and resilience: Reused water is purified well beyond drinking water standards, improving resilience and ensuring quality for both potable and even non-potable purposes.
    • Uphold safety: Treatment processes like ozone and ultraviolet light can be used to disinfect or break down complex contaminants, ensuring water is pathogen-free and concentrations are below maximum contaminant levels (MCL).
    • Ensure cost savings and efficiency: After treating a waste stream to discharge level, it may require less treatment to bring it to reuse standards, making reuse not only environmentally responsible but also cost-effective in many scenarios and locations.
    • Conserve traditional water supplies: By reusing water, we can lessen our reliance on conventional water resources like rivers, lakes, and aquifers, thereby conserving them for future generations.
    • Reduce carbon footprint: Water reclamation is often more efficient than treating a raw water resource, which can lessen environmental impact.
    • Enable versatility and customization: Advanced treatment systems are tailored to meet specific needs for a variety of sectors, including industrial, urban, agricultural, and public access area uses.

    How to reuse water 

    The major aim of every reuse project is to minimize human health risk associated with the use or consumption of reclaimed water. While the exact treatment requirements depend upon the source water quality and the reuse purpose, to be cost-effective, the treatment must be energy efficient and have a high-water yield.

    An adequate treatment design plan depends on the application the water will be used in. In non-potable applications, normally filtration and disinfection will suffice, while potable reuse generally requires a combination of advanced treatment processes such as membrane filtration, reverse osmosis, disinfection, and/or advanced oxidation.

    Xylem has brands and solutions to fit every stage of the water reuse process: 

    • beginning with the transport of raw sewage and wastewater with Xylem brands like Flygt
       
    • to secondary treatment to remove most dissolved and suspended organic matter and nutrients with brands like Sanitaire and Envirex
    • to tertiary stages that remove residual particulate matter, nutrients, TDS, and nematode eggs with brands like Leopold and Davco
    • along with disinfection and advanced oxidation that inactivates pathogens, and breaks down trace constituents and emerging contaminants of concern with brands like Wedeco, ETS-UV, ATG UV Systems, Pacific Ozone, and Wallace & Tiernan 
    • and finally, digital solutions like YSI, OI Analytical, Xylem Vue that leverage remote monitoring, alerts, and data analytics for proactive and predictive maintenance

    Based on practical knowledge from decades of combined brand experience, thousands of installations worldwide, and strengths in powerful R&D innovation, our team looks at the entire wastewater process at your plant. We will work with your consulting engineer and State regulators to integrate the right technologies to meet your intended targets. Modular design makes it easy to fit your requirements now and easily expand to meet your future needs.

    Water reuse partnership 

    Though Xylem has teams of specialists, years of expertise, deep understanding of water regulations, and a broad solutions portfolio, we understand the complexities of water systems and the potential to partner with various water treatment experts. Xylem has partnered with hundreds of different firms around the globe to ensure the most efficient and viable water systems for communities and municipalities.

    Our goal is to thoroughly understand each project, determine the best methods, and customize optimal solutions that meet local regulations and requirements while delivering resiliency, quality, and cost savings.

    Let us be your partner in making every drop count. Contact us today to discuss your project needs.

58. Arkal Super Galaxy Self-Cleaning Disc Filter 2/6/2013

    The Arkal Super Galaxy is a high-flow rate, self-cleaning, automatic disc filter. It is practical for water and wastewater treatment plants, central water systems for irrigation, large cooling tower power plants, ballast water, and saltwater, as it handles desalination. In addition, it controls algae and reduces hydraulic filtration degrees to less than 20 microns. Its vertical and horizontal installation options accommodate all space issues.

59. ReFleX™ Efficiency 4/16/2014

    For both disinfection and TOC-reduction applications, NeoTech Aqua Solutions’ patented ReFleX™ UV chamber technology represents the state-of-the-art in high-efficiency UV systems by reflecting over 99% of the UV we generate back into the water.

60. ETS-UV™ For Water Reuse 2/3/2017

    Given the critical shortage of drinking water in many regions, advanced treatment and reuse of wastewater is becoming increasingly common as municipalities address water demands and shrinking supplies.