Drinking Water Flow Control and Measurement Application Notes

  1. Ultrasonic Flow Meters - Clamp-On 11/20/2015

    The SITRANS FS230 digital clamp-on ultrasonic flow meter is a process-optimizing solution for measuring flow in virtually any liquid application. The FS230 is an ideal fit for many industries requiring high-quality liquid flow measurement.

  2. Fox Model FT1 Gas Mass Flow Meter 8/23/2016

    The Fox DDC-Sensor™ is a new state-of-the-art sensor technology used in the Fox Model FT1 Thermal Gas Flow Meter. The DDC-Sensor™, a Direct Digitally Controlled sensor, is unlike other thermal flow sensors available on the market. Instead of using traditional analog circuitry, the DDC-Sensor™ is interfaced directly to the FT1 microprocessor for more speed and programmability. The DDC-Sensor™ accurately responds to changes in process variables (gas flow rate, pressure, and temperature) to determine mass flow rate, totalized flow, and temperature.

     

  3. TIDALFLUX 2300 Electromagnetic Flowmeter 8/26/2019

    The TIDALFLUX 2300 is an electromagnetic flowmeter (EMF) with a patented, capacitive level measurement for use in partially filled pipes (up to DN1600 / 64”). The meter is the ideal solution for flow measurement of municipal or industrial wastewater in pressureless transport lines. However, the EMF is also suitable for measurement of effluent brine from dredging, mining or sea/well water injection applications. Unlike open channel systems (Venturi, V-notches etc.) the inline flowmeter is a closed measuring solution without obstructions and with a much better accuracy at lower total costs of ownership.

  4. QLF Series In-Line Ultrasonic Flow Meters For Low Viscosity Low Flow Rate Applications 11/29/2019

    The QLF Series in line ultrasonic flow meter has been specifically designed for low flow rate applications that require excellent accuracy & reliability. The compact QLF Series has no moving parts, non-wetted sensors and no obstructions in the flow stream to cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

  5. Electromagnetic Flowmeter ProcessMaster FEP300 7/15/2015

    The modular design of the ProcessMaster FEP300 standard version offers the industry's widest range of liners electrodes and sizes to meet the needs of even the most demanding process applications in sectors as diverse as chemical, power, oil & gas, pulp & paper and metals & mining.

  6. FLUXUS ADM 5107 Water Flowmeter 12/9/2014

    The FLUXUS ADM 5107 is FLEXIM's solution for many flow metering applications found in the water and wastewater sector and adjacent industries. As FLEXIMs basic and economic alternative, the ADM 5107 offers the same benefits in terms of accuracy and reliability as its bigger brothers, the FLUXUS ADM 7407 and ADM 8027.

  7. Take Control Of Your Water Distribution Network With Digitalization And Remote Monitoring 5/19/2022

    Any process plant constantly generates a high volume of status data. Today, this data can be extracted from the plant, stored, analyzed, and prepared to meet operator needs and lower marginal costs.

  8. Displacer Level Switches 11/15/2013

    Magnetrol® displacement type level switches offer the industrial user a wide choice of alarm and control configurations.

  9. SITRANS LT500 MultiRanger/HydroRanger 11/14/2024

    SITRANS LT500 is the next evolution of digital level, flow, and pump controllers for radar and ultrasonic transmitters – or any 2-wire 4-20 mA device. It is the first choice for radar sensor measurements at 80 GHz and features single and dual point measurements, 6 relays, and Modbus RTU, HART, PROFIBUS DP, PROFIBUS PA, PROFINET.

  10. OPTISONIC 7300 Ultrasonic Flowmeter 9/16/2019

    The OPTISONIC 7300 is a universal 2-path ultrasonic gas flowmeter for process and utility gas measurements in oil and gas refineries or the chemical or petrochemical industries. It is also suitable for non-custody transfer natural gas applications or applications with (compressed) air, mixed or flue gases (up to +180°C / +356°F).