Drinking Water Flow Control and Measurement Application Notes

  1. OPTIFLUX 2100 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 2100 is an electromagnetic flowmeter (EMF) for standard water and wastewater applications. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. Installation in measurement chambers subject to (constant) flooding is possible with the remote IP68 / NEMA 6P rated version.

  2. AquaTrans™ AT600 Flow Meter 6/5/2025

    The AquaTrans AT600 liquid flow ultrasonic transmitter combines state-of-the-art flow measurement capability with a low-cost transmitter package that can be installed right at the process measurement point. It’s designed specifically for water and wastewater applications in full pipes. The all-digital AquaTrans AT600 has no moving parts and requires minimal maintenance.

  3. Echotel® Non-Contact Ultrasonic Two-Wire Transmitter 11/15/2013

    Echotel® Model 355 is a loop-powered, non-contact-type ultrasonic transmitter that performs liquid level, volume or open channel flow measurement.

  4. Temperature Measurement 12/2/2015

    SITRANS T temperature measurement devices can be connected to many different thermocouples and resistance thermometers, as well as mV and resistance sensors. The SITRANS T temperature transmitters are available as intrinsically safe, explosion proof and non-sparking versions and also as non-hazardous.

  5. QCT Series In-Line Ultrasonic Flow Meters for Low Viscosity Liquid Applications 11/29/2019

    The compact QCT Series has no moving parts and there is nothing in the flow stream that will cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

  6. OPTIFLUX 5300 Electromagnetic Flowmeter 9/9/2019

    The OPTIFLUX 5300 is an electromagnetic flowmeter (EMF) with a high-tech ceramic measuring tube for very aggressive and abrasive fluids, even with high solid content (up to 70%). The high-end EMF is particularly suited for process applications in the chemical processing industry and the minerals and mining sector. Due to its FDA and EC1935/2004 compliant sensor material, the OPTIFLUX 5300 can also be used for hygienic applications. With a measuring uncertainty of just ±0.15% of measured value (±1 mm/s) it is one of the most accurate electromagnetic flowmeters available in the market. That is why leading metrological institutes use the OPTIFLUX 5300 as their master meter.

  7. Capital Controls® VEGA™ Gas Chlorinator Vent Exhaust Gas Arrestor 10/6/2015

    The Capital Controls® VEGA™ is a disposable chlorinator vacuum regulator vent gas arrestor designed to treat occasional chlorine gas vent releases that may accompany chlorine container changeovers and fouled vacuum regulator inlet valves. The field tested VEGA prevents nuisance tripping of chlorine room air sensor alarms; helps compliance with local, state and federal code restrictions against exhausting chlorine fumes outside of a building; keeps the building free from chlorine related acid corrosion.

  8. EL 1222 Series Compact Insertion Mag Meter For Portable Installation 11/29/2019

    The EL 1222 is a compact insertion electromagnetic flowmeter that can be used for temporary or permanent installations. Its compact size and bi-directional measurement capability delivers excellent accuracy for customers who do not want to or have space restrictions to install a full-bore meter. Typical applications include water network management, district metering and leak detection.

  9. FLUXUS F704 Ultrasonic Flowmeter 12/9/2014

    With one or two flow channels and versatile electrical inputs and outputs, the FLUXUS F704 can optimally be configured to your application needs, measuring and handling a variety of process parameters.

  10. Sonic-Pro Chemical Feed Flow Meter 11/7/2022

    The Ms6 is a plug-and-play flow meter that works right out of the box, and accurately measures liquid chemical feed from ranges of 10-5,000 mL/min and 100-10,000 mL/min.