Drinking Water Flow Control and Measurement Application Notes

  1. FLUXUS F704 Ultrasonic Flowmeter 12/9/2014

    With one or two flow channels and versatile electrical inputs and outputs, the FLUXUS F704 can optimally be configured to your application needs, measuring and handling a variety of process parameters.

  2. Reduce Or Eliminate Water Hammer With Valve Positioners 5/19/2022

    Water hammer, which can occur in just about any pumping system and even steam systems, can lead to pipe breakage, equipment damage or even total system failure. Addressing water hammer at the source is the savviest and most cost-effective way to handle the issue.

  3. DigitalFlow™ DF868 Liquid Ultrasonic Flowmeter 1/11/2022

    The DigitalFlow DF868 is a full-featured, fixed-installation liquid flowmeter designed to meet all your flow metering and energy measurement needs. Its patented Correlation Transit-Time™ digital signal processing provides drift-free measurements in ultraclean and most “dirty” liquids. This includes fluids with gas bubbles and entrained solids that have previously required Doppler-type meters.

  4. OPTIFLUX 2100 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 2100 is an electromagnetic flowmeter (EMF) for standard water and wastewater applications. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. Installation in measurement chambers subject to (constant) flooding is possible with the remote IP68 / NEMA 6P rated version.

  5. Stratum PTC Purge And Trap Concentrator 10/15/2014

    In 1974, Tekmar developed an idea that revolutionized the way laboratories performed Volatile Organic Compound (VOC) testing. Since then, Tekmar has continued to build on the foundation of the initial Purge and Trap technique one innovative layer at a time. The Stratum PTC builds on eight previous generations, making us the industry’s cornerstone of technique and support.

  6. Flow Monitoring At Sea Water Reverse Osmosis Plant Improves Water Distribution 1/6/2025

    Read about a desalination plant that was in need of a practical verification methodology for permanent and/or temporary (portable) solutions on large pipes.

  7. Optimizing Brine Flow In A Geothermal Power Plant 1/27/2022

    Different flow meter technologies were used in this geothermal power plant to monitor and measure brine. However, these traditional technologies failed. That’s where Panametrics PT900 Portable Ultrasonic Flowmeter was able to help.

  8. OPTIMASS 2400 Coriolis Mass Flowmeter 9/9/2019

    The OPTIMASS 2400 is the world’s highest capacity Coriolis mass flowmeter for liquids and gases. With its twin or four straight tube design, the Coriolis meter is ideally suited for bunkering operations and custody transfer or fiscal metering in the oil and gas industry. It can also be used for any bulk mass application with many other products such as syrup, molasses or raw chemicals up to 4,600 t/h / 169,000 lb/min. The Coriolis meter features Entrained Gas Management (EGMTM) for liquid applications, maintaining operation over a wide range of gas fractions and complex flow conditions. In this way, the Coriolis device enables continuous and uninterrupted measurement of mass and volume flow, density and temperature – even at difficult process conditions with 2-phase flow.

  9. FLUXUS ADM 5107 Water Flowmeter 12/9/2014

    The FLUXUS ADM 5107 is FLEXIM's solution for many flow metering applications found in the water and wastewater sector and adjacent industries. As FLEXIMs basic and economic alternative, the ADM 5107 offers the same benefits in terms of accuracy and reliability as its bigger brothers, the FLUXUS ADM 7407 and ADM 8027.

  10. OPTISONIC 6300 P Ultrasonic Clamp-On Flowmeter 9/16/2019

    The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. As standard the clamp-on flowmeter is also provided with a measurement option for thermal energy applications.