Drinking Water Flow Control and Measurement Application Notes

  1. Magnetic Flow Meters 11/20/2015

    Interchangeable sensors and transmitters provide ideal flexibility for flow measurement.

  2. SITRANS LR100 4/27/2023

    Liquid, slurry, or solids measurements? Dirty applications? These maintenance-free sensors deliver the reliable performance you need, no matter what the environment.

  3. AquaTrans™ AT600 6/5/2025

    The AquaTrans AT600 liquid flow ultrasonic transmitter combines state-of-the-art flow measurement capability with a low-cost transmitter package that can be installed right at the process measurement point. It’s designed specifically for water and wastewater applications in full pipes. The all-digital AquaTrans AT600 has no moving parts and requires minimal maintenance.

  4. OPTISONIC 7300 Biogas Ultrasonic Flowmeter 8/26/2019

    The OPTISONIC 7300 Biogas is an ultrasonic flowmeter for low pressure biogas, landfill and sewage gas applications. The flowmeter is ideally suited to measure biogas with a high CO2 content as well as small amounts of other media like H2S, nitrogen, hydrocarbons or condensation water. Its corrosion resistant titanium transducers provide a strong ultrasonic signal into the gas. The signal processing of the meter allows a better detection of small, strongly dampened acoustic signals.

  5. Capital Controls® Series 71P11A Gas Pressure Reducing Valve 10/15/2015

    The Series 71P11A Gas Pressure Reducing and Shutoff Valve is a diaphragm-type gas pressure regulating valve designed for use on chlorine, sulfur dioxide and ammonia gas service. The valve is used in a gas dispensing system to prevent liquefaction of the gas by providing a controlled pressure drop in the piping system. Downstream pressure is regulated to a reduced value by adjustment of the control setting. If the downstream pressure exceeds the pressure at which the valve is set, gas flow will be shut off.

  6. Capital Controls® Series 17T2000 Amperometric Titrator 10/22/2015

    The Series 17T2000 Amperometric Titrator is an analytical instrument for the electrical determination of the end point of a titration for free, combined, or total chlorine residual. It can also be used to determine bromine, iodine, ozone, permanganate, and chlorine dioxide residuals.

  7. QCT Series In-Line Ultrasonic Flow Meters for Low Viscosity Liquid Applications 11/29/2019

    The compact QCT Series has no moving parts and there is nothing in the flow stream that will cause an increase in pressure drop; this results in a very rugged, reliable and accurate flow meter. High accuracy & repeatability is achieved through the unique measurement section within the flow meter where the flow is conditioned and delta T is measured along the axis of the flow meter. The small footprint, lightweight device is ideal for low viscosity liquid applications including water, water-based products, oils, and its all plastic construction makes it the meter of choice for many corrosive fluids.

  8. WATERFLUX 3300 Electromagnetic Flowmeter 9/3/2019

    The WATERFLUX ,3300 is an electromagnetic flowmeter (EMF) for demanding water applications and custody transfer operations (MID MI-001, OIML R49; MI-004). The high-end meter is particularly suitable for applications requiring high accuracy and extensive diagnostics. With its rectangular and reduced cross-section the EMF enables a stable measurement even at low flow rates. This way, the WATERFLUX ,3300 offers a much larger turndown ratio (1000:1) than mechanical flowmeters (e.g. turbine meters) in drinking water distribution networks.

  9. FLUXUS F601 Portable Flowmeter 12/9/2014

    The FLUXUS F601 is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters.

  10. Capital Controls® Series 200 Vacuum Gas Feeders 10/8/2015

    ADVANCE™ Series 200 gas feeders are designed for or automatic gas regulation. Automatic operation requires a simple addition of a motorized control valve.