Drinking Water Flow Control and Measurement Application Notes

  1. ModMAG® M5000 Electromagnetic Flow Meters 7/21/2020

    The ModMAG® M5000 Electromagnetic flow meter is an ideal solution for remote potable water applications, providing consistently reliable and accurate measurements. It is conveniently powered by a battery and built for field verification testing.

  2. Optimizing Brine Flow In A Geothermal Power Plant 1/27/2022

    Different flow meter technologies were used in this geothermal power plant to monitor and measure brine. However, these traditional technologies failed. That’s where Panametrics PT900 Portable Ultrasonic Flowmeter was able to help.

  3. Atomx Automated VOC Sample Prep System 10/15/2014

    The Atomx Automated Sample Prep System combines an Autosampler and Purge and Trap into a single instrument for the analysis of VOCs in soils and waters. This is the first of its kind and only system that employs a unique methanol extraction automation feature for high level soils in accordance with USEPA Method 5035.

  4. FLUXUS® F401 Portable Flow Meter 12/9/2014

    The FLUXUS® F401 is FLEXIM's dedicated single channel portable flow meter for applications in the municipial water and wastewater sector offering long term stable and precise bidirectional flow measurements in remote areas outdoor - being ideal for water loss activities prescribed in AWWA M-36.

  5. OPTISONIC 6300 P Ultrasonic Clamp-On Flowmeter 9/16/2019

    The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. As standard the clamp-on flowmeter is also provided with a measurement option for thermal energy applications.

  6. Echotel® Non-Contact Ultrasonic Two-Wire Transmitter 11/15/2013

    Echotel® Model 355 is a loop-powered, non-contact-type ultrasonic transmitter that performs liquid level, volume or open channel flow measurement.

  7. CFPS-3 Plastic Triplex Skid System 11/7/2022

    The CHEM-FEED CFPS-3 Triplex Skid System design allows for a two-pump injection system with one pump acting as a backup, eliminating downtime in critical applications.

  8. ModMAG M2000 Electromagnetic Flow Meters 7/21/2020

    Combining a general-purpose detector with an amplifier, the ModMAG M2000 electromagnetic flow meter features an advanced, user-friendly design that is built for field verification testing with the use of a simple, handheld device. 

  9. Fox Model FT1 Gas Mass Flow Meter 8/23/2016

    The Fox DDC-Sensor™ is a new state-of-the-art sensor technology used in the Fox Model FT1 Thermal Gas Flow Meter. The DDC-Sensor™, a Direct Digitally Controlled sensor, is unlike other thermal flow sensors available on the market. Instead of using traditional analog circuitry, the DDC-Sensor™ is interfaced directly to the FT1 microprocessor for more speed and programmability. The DDC-Sensor™ accurately responds to changes in process variables (gas flow rate, pressure, and temperature) to determine mass flow rate, totalized flow, and temperature.

     

  10. OPTIFLUX 1100 Electromagnetic Flowmeter 8/26/2019

    The OPTIFLUX 1100 is a cost-effective electromagnetic flowmeter (EMF) with a lightweight wafer-style design. The meter is an economical solution for general applications with conductive liquids (≥5 μS/cm) and lowers solid content (up to 10%). Unlike the basic device OPTIFLUX 1050, the OPTIFLUX 1100 offers better accuracy. It is suitable for use in various industries – from water, wastewater, and mobile applications to machine building (OEM), agriculture, and utilities to firefighting.