Resources For The Power Generation Industry

  1. Hydro-Electric Power Station Benefits From The Use Of Siemens Flow Meters 3/30/2020

    A power plant plant experienced an accident when a pipe broke after it was sand-dusted during maintenance. The pump location, including the turbines and control room, was completely flooded. Read about the customer's search for a cost-effective flow measurement solution to drive a safety shut-down valve in case the pipe should break again.

  2. Power-Gen Efficiency Boosted By Clamp-On Flow Meters 3/26/2020

    When an energy storage facility in New York, USA was looking for a way to improve the efficiency of their power generating turbines they did not have many options to choose from. Because of the sheer size, the space limitations and performance requirements of the application, the only option was to install a SITRANS FS230 clamp-on ultrasonic flow meter from Siemens. 

  3. Water And Power Generation Remain A Balancing Act Amid Tightening Regulations 11/1/2019

    A recent survey digs into the treatment aspects of water in the power industry, revealing how electric utilities are responding to concerns over regulations and volumes of use.

  4. ABB Ability: Our Offering For Power Plants 4/5/2019

    ABB provides an extensive selection of proven measurement and analytical products and solutions for power generation industry applications.

  5. Design And Care Of Reverse Osmosis Systems, Part 3: Operation And Monitoring 2/5/2019

    Reverse osmosis (RO) systems offer power plant owners and operators a reliable and well-proven water treatment solution. However, designing and caring for an RO system requires a thorough understanding of a plant’s water supply and the technology’s capabilities. The final article of this three-part series will address RO system operation and maintenance best practices.

  6. Design And Care Of Reverse Osmosis Systems, Part 2: Upstream Equipment 1/14/2019

    The success of a new reverse osmosis (RO) membrane system is often directly related to its pretreatment. The previous section of this article discussed RO design issues and introduced how a pilot study should include a study of its probable pretreatment equipment since the pretreatment performance will directly affect the performance of the RO system. However, piloting the upstream processes can be challenging in sizing these components for the pilot RO unit’s low flow rate.

  7. Design And Care Of Reverse Osmosis Systems, Part 1: Design 12/20/2018

    Reverse osmosis (RO) systems offer power plant owners and operators a reliable and well-proven water treatment solution. However, designing and caring for an RO system requires a thorough understanding of a plant’s water supply and the technology’s capabilities. Part one of this series will review the importance of water samples and pilot studies as plant engineers begin to design an RO system to match their needs.

  8. Creating Stability For The Energy Revolution Takes Ability 8/6/2018

    ABB provides an extensive selection of proven measurement and analytical products and solutions for power generation industry applications.

  9. Keeping The Operator In Focus: The Four Pillars Of Operator Effectiveness 8/2/2018

    This paper shows how the four pillars of operator effectiveness lead operators to greater awareness, faster response and better decisions.

  10. West Deptford Energy Station Becomes Model Of Highly Efficient And Sustainable Energy Generation 7/11/2018

    Veolia furnished West Deptford Energy with a BIOSTYR® Biological Aerated Filter (BAF) and Hydrotech Discfilter system, allowing effluent from a municipal wastewater plant to be reused, with a treatment capacity of 7.35 MGD, in the operation of their new “green” energy station.