Wastewater Membranes White Papers & Case Studies

  1. Oxygen Removal From The Feedwater Of A Central District Heating System
    9/17/2018

    Central district heating systems have gained attention in recent years because they can be more efficient than localized boiler units. The efficiency of district heating is usually due to power generation plants being able to produce heat and electricity simultaneously. District heating also helps prevent pollution by using advanced flue gas cleaning techniques.

  2. Power Plant Uses Membrane Contactors To Remove CO2 From Water
    9/17/2018

    A major power plant in Thailand is using 3M™ Liqui-Cel™ Membrane Contactors to remove carbon dioxide from a DI water system. The system is an expansion project and will be used to feed a high pressure boiler. Liqui-Cel membrane contactors are being used to lower the CO2 inlet into an Ionpure Electrodeionization (EDI) system. Carbon dioxide adds an ionic load to the EDI system, which can reduce the performance of the system. Manufactures of the EDI equipment suggest lowering the inlet CO2 to reduce the load on the equipment and improve the water quality.

  3. Savings Helps MABRs Gain Traction In Municipalities
    5/9/2018

    An MABR is essentially a biological wastewater treatment process that utilizes seemingly passive aeration through oxygen-permeable membranes. Oxygen transfer through the MABR membranes is diffusion based: driven by concentration differences such that oxygen passes from air at atmospheric pressure into water at a higher hydrostatic pressure. This oxygen transfer mechanism, wherein air is supplied to the process at very low pressure, is the reason MABRs have significantly lower energy consumption compared to other wastewater treatment processes, such as conventional activated sludge (CAS), that utilize diffusers. This energy savings is one of the key reasons MABRs are gaining traction in the municipal wastewater industry.

  4. Membrane Technologies In Containerized Units Allow For Installation In A Small Footprint
    4/23/2018

    After an international tender process, the Israel Electric Company (IEC) chose Fluence to design, manufacture, and supply containerized ultrapure water production systems for use as makeup water for heat-recovery steam generators (HRSG) and for NOx emission reduction at recently upgraded power plants across Israel. More than 15 units of 20 m3/h production modules, each fitted in two 40-foot shipping containers, were provided to seven power plants. Their compact design allowed for ease of installation, operation, and maintenance while meeting the customer’s demanding engineering standards.

  5. Addressing Fouling Challenges In Water Treatment With RO Membrane
    4/18/2018

    Reverse osmosis (RO) membranes are widely used in potable water, wastewater, and industrial applications. However, a major issue in the application of RO membrane technology for desalination and wastewater reclamation is membrane fouling. It limits operating flux, decreases water production, and increases power consumption. Membrane fouling also increases the need for RO plants to perform periodical membrane CIP procedure. These problems decrease process efficiency, increase operation cost, and raise environmental issues related to the CIP solutions disposal.

  6. MABR Is The Big Cheese For This Dairy Farming WWTP
    1/29/2018

    Hayogev is a residential development in the rural area of Jezreel Valley, with 1000 homes, agricultural fields and dairy farms. Located in an open field next to small farms, the local treatment facility handles wastewater from HaYogev and Midrach Oz. The customer was looking for a localized wastewater treatment solution to replace the existing pond system, which faced difficulties in treating the wastewater due to high levels of nutrients. A new state-level regulation concerning reclaimed water required the wastewater treatment plant (WWTP) operator to reduce the nutrients in the effluent stream. The solution had to be odorless and quiet, have low power consumption, and use the existing pond and structure.

  7. Denitrification Technology Significantly Improves Polluted Chesapeake Bay Watershed
    11/14/2017

    The 64,000 sq ft Chesapeake Bay Watershed includes parts of MD, VA, WV, PA, and NY. Of the 1,000s of WWTPs supporting nearly 18 million people in the watershed, 470 are designated by EPA as significant sources of nutrients and TSS. Algal blooms reduce DO levels in the water, killing plant and animal life — from marsh grasses to blue crabs to rockfish. Learn how De Nora TETRA Denite technology is treating 450+ MGD in the Bay.

  8. Protecting Water Resources: A Multifaceted Approach
    11/7/2017

    As the cost of and demand for potable water increases, engineers, planners, and utilities need reliable, innovative methods for protecting this valuable resource. Cost-effective and environmentally sustainable wastewater collection and treatment systems are vital components in the water cycle and therefore require careful analysis. While there is no single solution for every site or community, traditional ‘big-pipe’ systems are rarely appropriate in sensitive environments; fortunately, today there are more options than ever to consider.

  9. Fluence’s MABR For Wastewater Treatment features Passive Aeration And Saves Up To 90% On Energy Costs
    10/26/2017

    The Bordeaux region of St. Thomas had a pressing need for a wastewater treatment plant that produces high effluent quality. Its existing plant was old and did not meet regulation nor industry standards. Fluence, together with its partner SD&C Inc., built an MABR-based wastewater treatment plant from the ground up, utilizing whatever existing pieces of equipment could be used from the old plant.

  10. Nanofiltration And Membrane Degassing Successfully Reduce Water Hardness And Excess CO₂ From Drinking Water
    8/10/2017

    Municipal water services continually utilize improved technologies so that they can offer their customers higher water quality. Water can be improved by partially softening the water, which results in lower detergent consumption and lower scaling on kitchen utensils and water fittings.